06.513GPPGSM Enhanced full rate speech processing functions: General descriptionTS
The GSM Enhanced Full Rate speech transcoder, VAD, DTX system and comfort noise parts of the audio processing functions (see figure 1) are defined in bit exact arithmetic. Consequently, they shall react on a given input sequence always with the corresponding bit exact output sequence, provided that the internal state variables are also always exactly in the same state at the beginning of the experiment.
The input test sequences provided in GSM 06.54  shall force the corresponding output test sequences, provided that the tested modules are in their home‑state when starting.
The modules may be set into their home states by provoking the appropriate homing‑functions.
NOTE: This is normally done during reset (initialization of the codec).
Special inband signalling frames (encoder‑homing‑frame and decoder‑homing‑frame) described in GSM 06.60  have been defined to provoke these homing‑functions also in remotely placed modules.
This mechanism is specified to support three main areas:
– type approval of mobile terminal equipment;
– type approval of infrastructure equipment;
– remote control and testing for operation and maintenance.
At the end of the first received homing frame, the audio functions that are defined in a bit exact way shall go into their predefined home states. The output corresponding to the first homing frame is dependent on the codec state when the frame was received. Any consecutive homing frames shall produce corresponding homing frames at the output.
Annex A (informative):
Change Request History
Release 1996 version
Release 1997 version
Figure 1, Sect.5
Addition of mu-law (PCS 1900)
Update to Version 7.0.2 for Publication
Release 1999 version
Update to Version 8.0.1 for Publication