2 References

07.603GPPGeneral Packet Radio Service (GPRS)Mobile Station (MS) supporting GPRSTS

The following documents contain provisions which, through reference in this text, constitute provisions of the present document.

  • References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
  • For a specific reference, subsequent revisions do not apply.
  • For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.

[1] GSM 01.04: “Digital cellular telecommunication system (Phase 2+); Abbreviations and acronyms”..

[2] GSM 02.02: "Digital cellular telecommunication system (Phase 2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)".

[3] GSM 02.60: "Digital cellular telecommunication system (Phase 2+); General Packet Radio Service (GPRS); Service Description Stage 1".

[4] GSM 03.02: "Digital cellular telecommunication system (Phase 2+); Network architecture".

[5] GSM 03.03: "Digital cellular telecommunications system (Phase 2+); Numbering, addressing and identification".

[6] GSM 03.10: "Digital cellular telecommunication system (Phase 2+); GSM Public Land Mobile Network (PLMN) connection types".

[7] GSM 03.22: "Digital cellular telecommunications system (Phase 2+); Functions related to Mobile Station (MS) in idle mode and group receive mode".

[8] GSM 03.40: "Digital cellular telecommunications system (Phase 2+); Technical realization of the Short Message Service (SMS); Point-to-Point (PP)".

[9] GSM 03.60: "Digital cellular telecommunication system (Phase 2+); General Packet Radio Service (GPRS) Service Description Stage 2".

[10] GSM 04.02: "Digital cellular telecommunication system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration".

[11] GSM 04.07: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface signalling layer 3; General aspects".

[12] GSM 04.08: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification".

[13] GSM 04.60: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Mobile Station (MS) – Base Station System (BSS) interface; Radio Link Control / Medium Access Control (RLC/MAC) protocol".

[14] GSM 04.64: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Logical Link Control (LLC)".

[15] GSM 04.65: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Subnetwork Dependent Convergence Protocol (SNDCP)".

[16] GSM 07.07: "Digital cellular telecommunication system (Phase 2+); AT command set for GSM Mobile Equipment (ME)".

[17] GSM 09.61: "Digital cellular telecommunication system (Phase 2+); General Packet Radio Service (GPRS); Interworking between the Public Land Mobile Network (PLMN) supporting GPRS and Packet Data Networks (PDN)".

[18] CCITT Recommendation E.164: "Numbering plan for the ISDN era".

[19] CCITT Recommendation V.42 bis: "Data communication over the telephone network – Data compression procedures for data circuit-terminating equipment (DCE) using error correction procedures".

[20] CCITT Recommendation X.3: "Packet assembly disassembly facility (PAD) in a public data network".

[21] CCITT Recommendation X.25: "Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dedicated circuit".

[22] CCITT Recommendation X.28: "DTE / DCE interface for a start-stop mode data terminal equipment accessing the packet assembly / disassembly facility (PAD) in a public data network situated in the same country".

[23] CCITT Recommendation X.29: "Procedures for the exchange of control information and user data between a packet assembly / disassembly (PAD) facility and a packet mode DTE or another PAD".

[24] CCITT Recommendation X.75: "Packet-switched signalling system between public networks providing data transmission services".

[25] CCITT Recommendation X.121: "International Numbering Plan for Public Data Networks".

[26] IETF RFC 768 (1980): "User Datagram Protocol" (STD 6).

[27] IETF RFC 791 (1981): "Internet Protocol" (STD 5).

[28] IETF RFC 792 (1981): "Internet Control Message Protocol" (STD 5).

[29] IETF RFC 793 (1981): "Transmission Control Protocol" (STD 7).

[30] ITU‑T Recommendation V.250 (ex V.25ter): "Serial asynchronous automatic dialling and control".

[31] ITU-T Recommendation V.24: "List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE)".

[32] ITU-T Recommendation V.28: "Electrical Characteristics for unbalanced double-current interchange circuits"

[33] ITU-T Recommendation V.80: "In-band DCE control and synchronous data modes for asynchronous DTE"

[34] IETF RFC 1661 (1994): “The Point-to-Point Protocol (PPP)” (STD 51).

[35] IETF RFC 1662 (1994): “PPP in HDLC-like framing” (STD 51).

[36] IETF RFC 1700 (1994): “Assigned Numbers” (STD 2).

[3]7 IETF RFC 1570 (1994):”PPP LCP Extensions“.

[38] IETF RFC 1989 (1996):”PPP Link Quality Monitoring“.

[39] IETF RFC 1332 (1992):”The PPP Internet Protocol Control Protocol (IPCP)“.

[40] IETF RFC 1877 (1995):”PPP IPCP Extensions for Name Server Addresses “.

[41] IETF RFC 2153 (1997):”PPP Vendor Extensions“.

[42] IETF RFC 1334 (1992):”PPP Authentication Protocols“.

[43] IETF RFC 1994 (1996):”PPP Challenge Handshake Authentication Protocol“.