2 References

03.463GPPTechnical Realization of Facsimile Group 3 Service - non transparentTS

The following documents contain provisions which, through reference in this text, constitute provisions of the present document.

  • References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
  • For a specific reference, subsequent revisions do not apply.
  • For a non-specific reference, the latest version applies.
  • A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.
  • For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y).

[1] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms".

[2] GSM 02.03: "Digital cellular telecommunications system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)".

[3] GSM 03.10: "Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) connection types".

[4] GSM 04.02: "Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration".

[5] GSM 04.08: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification".

[6] GSM 04.21: "Digital cellular telecommunications system (Phase 2+); Rate adaption on the Mobile Station ‑ Base Station System (MS ‑ BSS) interface".

[7] GSM 07.01: "Digital cellular telecommunications system (Phase 2+); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)".

[8] GSM 07.03: "Digital cellular telecommunications system (Phase 2+); Terminal Adaptation Functions (TAF) for services using synchronous bearer capabilities".

[9] GSM 09.07: "Digital cellular telecommunications system (Phase 2+); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)".

[10] CCITT Recommendation F.160: "General operational provisions for the international public facsimile services".

[11] CCITT Recommendation T.4: "Standardization of group 3 facsimile apparatus for document transmission".

[12] CCITT Recommendation T.30: "Procedures for document facsimile transmission in the general switched telephone network".

[13] CCITT Recommendation T.35: "Procedure for the allocation of CCITT members’ codes".

[14] CCITT Recommendation V.21: "300 bits per second duplex modem standardized for use in the general switched telephone network".

[15] CCITT Recommendation V.24: "List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit‑terminating equipment (DCE)".

[16] CCITT Recommendation V.25 bis: "Automatic calling and/or answering equipment on the general switched telephone network (GSTN) using the 100‑series interchange circuits".

[17] CCITT Recommendation V.27 ter: "4 800/2 400 bits per second modem standardized for use in the general switched telephone network".

[18] CCITT Recommendation V.29: "9 600 bits per second modem standardized for use on point‑to‑point 4‑wire leased telephone‑type circuits".

[19] CCITT Recommendation X.300: "General principles and arrangements for interworking between public data networks, and between public data networks and other networks".

2.1 Abbreviations

In addition to those below abbreviations used in the present document are listed in GSM 01.04.

BCS Binary coded signalling

CCT Circuit(s)

I/F Interface

RA1,RA1′,RA2 Rate adaptation functions

SREJ Selective reject

The abbreviations for the facsimile specific protocol elements and signals are listed in appendix I.