2 References
04.563GPPGSM Cordless Telephony System (CTS), (Phase 1) CTS Radio Interface Layer 3 SpecificationTS
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies.
- A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.
- For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y).
[1] GSM 01.02: "Digital cellular telecommunications system (Phase 2+); General description of a GSM Public Land Mobile Network (PLMN)".
[2] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms".
[3] GSM 02.02: "Digital cellular telecommunications system (Phase 2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)".
[4] GSM 02.03: "Digital cellular telecommunications system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)".
[5] GSM 02.09: "Digital cellular telecommunications system (Phase 2+); Security aspects".
[6] GSM 02.11: "Digital cellular telecommunications system (Phase 2+); Service accessibility".
[7] GSM 02.17: "Digital cellular telecommunications system (Phase 2+); Subscriber identity modules Functional characteristics".
[8] GSM 02.40: "Digital cellular telecommunications system (Phase 2+); Procedures for call progress indications".
[9] GSM 03.01: "Digital cellular telecommunications system (Phase 2+); Network functions".
[10] GSM 03.03: "Digital cellular telecommunications system (Phase 2+); Numbering, addressing and identification".
[11] GSM 03.13: "Digital cellular telecommunications system (Phase 2+); Discontinuous Reception (DRX) in the GSM system".
[12] GSM 03.14: "Digital cellular telecommunications system (Phase 2+); Support of Dual Tone Multi-Frequency signalling (DTMF) via the GSM system".
[13] GSM 03.20: "Digital cellular telecommunications system (Phase 2+); Security related network functions".
[14] GSM 03.22: "Digital cellular telecommunications system (Phase 2+); Functions related to Mobile Station (MS) in idle mode".
[15] GSM 04.02: "Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration".
[16] GSM 04.03: "Digital cellular telecommunications system (Phase 2+); Mobile Station – Base Station System (MS – BSS) interface Channel structures and access capabilities".
[17] GSM 04.04: "Digital cellular telecommunications system (Phase 2+); layer 1 General requirements".
[18] GSM 04.05: "Digital cellular telecommunications system (Phase 2+); Data Link (DL) layer General aspects".
[19] GSM 04.06: "Digital cellular telecommunications system (Phase 2+); Mobile Station – Base Station System (MS – BSS) interface Data Link (DL) layer specification".
[20] GSM 04.07: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface signalling layer 3 General aspects".
[21] GSM 04.10: "Digital cellular telecommunications system ; Mobile radio interface layer 3 Supplementary services specification General aspects".
[22] GSM 04.11: "Digital cellular telecommunications system (Phase 2); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface".
[23] GSM 04.12: "Digital cellular telecommunications system (Phase 2+); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface".
[24] GSM 04.80: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 supplementary services specification Formats and coding".
[25] GSM 04.81: "Digital cellular telecommunications system (Phase 2+); Line identification supplementary services – Stage 3".
[26] GSM 04.82: "Digital cellular telecommunications system (Phase 2+); Call Forwarding (CF) supplementary services – Stage 3".
[27] GSM 04.83: "Digital cellular telecommunications system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) supplementary services – Stage 3".
[28] GSM 04.84: "Digital cellular telecommunications system (Phase 2+); MultiParty (MPTY) supplementary services – Stage 3".
[29] GSM 04.85: "Digital cellular telecommunications system (Phase 2+); Closed User Group (CUG) supplementary services – Stage 3".
[30] GSM 04.86: "Digital cellular telecommunications system (Phase 2+); Advice of Charge (AoC) supplementary services – Stage 3".
[31] GSM 04.88: "Digital cellular telecommunications system (Phase 2+); Call Barring (CB) supplementary services – Stage 3".
[32] GSM 05.02: "Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path".
[33] GSM 05.05: "Digital cellular telecommunications system (Phase 2+); Radio transmission and reception".
[34] GSM 05.08: "Digital cellular telecommunications system (Phase 2+); Radio subsystem link control".
[35] GSM 05.10: "Digital cellular telecommunications system (Phase 2+); Radio subsystem synchronisation".
[36] GSM 07.01: "Digital cellular telecommunications system (Phase 2+); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)".
[37] GSM 09.02: "Digital cellular telecommunications system (Phase 2+); Mobile Application Part (MAP) specification".
[38] GSM 09.07: "Digital cellular telecommunications system (Phase 2+); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)".
[39] GSM 11.10: "Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformity specification".
[40] GSM 11.21: "Digital cellular telecommunications system (Phase 2); The GSM Base Station System (BSS) equipment specification".
[41] ISO/IEC 646 (1991): "Information technology – ISO 7-bit coded character set for information interchange".
[42] ISO/IEC 6429: "Information technology – Control functions for coded character sets".
[43] ISO 8348 (1987): "Information processing systems – Data communications – Network service definition".
[44] CCITT Recommendation E.163: "Numbering plan for the international telephone service".
[45] CCITT Recommendation E.164: "Numbering plan for the ISDN era".
[46] CCITT Recommendation E.212: "Identification plan for land mobile stations".
[47] ITU-T Recommendation F.69 (1993): "Plan for telex destination codes".
[48] CCITT Recommendation I.330: "ISDN numbering and addressing principles".
[49] CCITT Recommendation I.440 (1989): "ISDN user-network interface data link layer – General aspects".
[50] CCITT Recommendation I.450 (1989): "ISDN user-network interface layer 3 General aspects".
[51] ITU-T Recommendation I.500 (1993): "General structure of the ISDN interworking recommendations".
[52] CCITT Recommendation T.50: "International Alphabet No. 5".
[53] CCITT Recommendation Q.931: ISDN user-network interface layer 3 specification for basic control".
[54] CCITT Recommendation V.21: "300 bits per second duplex modem standardized for use in the general switched telephone network".
[55] CCITT Recommendation V.22: "1200 bits per second duplex modem standardized for use in the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits".
[56] CCITT Recommendation V.22bis: "2400 bits per second duplex modem using the frequency division technique standardized for use on the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits".
[57] CCITT Recommendation V.23: "600/1200-baud modem standardized for use in the general switched telephone network".
[58] CCITT Recommendation V.26ter: "2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2-wire leased telephone-type circuits".
[59] CCITT Recommendation V.32: "A family of 2-wire, duplex modems operating at data signalling rates of up to 9600 bit/s for use on the general switched telephone network and on leased telephone-type circuits".
[60] CCITT Recommendation V.110: "Support of data terminal equipments (DTEs) with V-Series interfaces by an integrated services digital network".
[61] CCITT Recommendation V.120: "Support by an ISDN of data terminal equipment with V-Series type interfaces with provision for statistical multiplexing".
[62] CCITT Recommendation X.21: "Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous operation on public data networks".
[63] CCITT Recommendation X.25: "Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dedicated circuit".
[64] CCITT Recommendation X.28: "DTE/DCE interface for a start-stop mode data terminal equipment accessing the packet assembly/disassembly facility (PAD) in a public data network situated in the same country".
[65] CCITT Recommendation X.30: "Support of X.21, X.21 bis and X.20 bis based data terminal equipments (DTEs) by an integrated services digital network (ISDN)".
[66] CCITT Recommendation X.31: "Support of packet mode terminal equipment by an ISDN".
[67] CCITT Recommendation X.32: "Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for terminals operating in the packet mode and accessing a packet switched public data network through a public switched telephone network or an integrated services digital network or a circuit switched public data network".
[68] CCITT Recommendation X.75 (1988): "Packet-switched signalling system between public networks providing data transmission services".
[69] CCITT Recommendation X.121: "International numbering plan for public data networks".
[70] ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network interface layer 3 Specifications for basic call control".
[71] ETS 300 102-2: "Integrated Services Digital Network (ISDN); User-network interface layer 3 Specifications for basic call control".
[72] ISO/IEC10646: "Universal Multiple-Octet Coded Character Set (UCS)"; UCS2, 16 bit coding.
[73] GSM 02.56: "Digital cellular telecommunications system (Phase 2+); GSM-CTS; Service Description; Stage 1".
[74] GSM 03.56: "Digital cellular telecommunications system (Phase 2+); GSM-CTS; Service Description; Stage 2".
[75] GSM 03.52: "Digital cellular telecommunications system (Phase 2+); GSM-CTS; Overall description of the CTS radio interface; Stage 2".
[76] GSM 04.08: "Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification".