2 References

07.033GPPTerminal Adaptation Functions (TAF) for services using synchronous bearer capabilitiesTS

The following documents contain provisions which, through reference in this text, constitute provisions of the present document.

  • References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
  • For a specific reference, subsequent revisions do not apply.
  • For a non-specific reference, the latest version applies.
  • A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.
  • For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y).

[1] GSM 01.04: "Digital cellular telecommunication system (Phase 2+); Abbreviations and acronyms".

[2] GSM 02.02: "Digital cellular telecommunication system (Phase 2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)".

[3] GSM 03.10: "Digital cellular telecommunication system (Phase 2+); GSM Public Land Mobile Network (PLMN) connection types".

[4] GSM 04.02: "Digital cellular telecommunication system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration".

[5] GSM 04.08: "Digital cellular telecommunication system (Phase 2+); Mobile radio interface layer 3 specification".

[6] GSM 04.21: "Digital cellular telecommunication system (Phase 2+); Rate adaption on the Mobile Station ‑ Base Station System (MS ‑ BSS) interface".

[7] GSM 04.22: "Digital cellular telecommunication system (Phase 2+); Radio Link Protocol (RLP) for data and telematic services on the Mobile Station ‑ Base Station System (MS ‑ BSS) interface and the Base Station System ‑ Mobile‑services Switching Centre (BSS ‑ MSC) interface".

[8] GSM 07.01: "Digital cellular telecommunication system (Phase 2+); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)".

[9] GSM 08.20 : "Digital cellular telecommunication system (Phase 2+); Rate adaption on the Base Station System ‑ Mobile‑services Switching Centre (BSS ‑ MSC) interface".

[10] GSM 09.06: "Digital cellular telecommunication system (Phase 2+); Interworking between a Public Land Mobile Network (PLMN) and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data transmission services".

[11] GSM 09.07: "Digital cellular telecommunication system (Phase 2+); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)".

[12] CCITT Series V Recommendations: "Data communication over the Telephone network".

[13] CCITT Series X Recommendations: "Data communication networks".

[14] CCITT Recommendation V.10: "Electrical characteristics for unbalanced double‑current interchange circuits for general use with integrated circuit equipment in the field of data communications".

[15] CCITT Recommendation V.11: "Electrical characteristics for balanced double‑current interchange circuits for general use with integrated circuit equipment in the field of data communications".

[16] CCITT Recommendation V.25: "Automatic answering equipment and/or parallel automatic calling equipment on the general switched telephone network including procedures for disabling of echo control devices for both manually and automatically established calls".

[17] CCITT Recommendation V.25 bis: "Automatic Calling and/or Answering Equipment on the General Switched Telephone Network (GSTN) using the 100‑series interchange circuits".

[18] CCITT Recommendation V.28: "Electrical characteristics for unbalanced double‑current interchange circuits".

[19] CCITT Recommendation V.110: "Support of data terminal equipments (DTEs) with V‑Series interfaces by an integrated services digital network".

[20] CCITT Recommendation V.24: "List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit‑terminating equipment".

[21] CCITT Recommendation X.24: "List of definitions for interchange circuits between Data Terminal Equipment (DTE) and Data Circuit Terminating Equipment (DCE) on Public Data Networks".

[22] CCITT Recommendation X.25: "Interface between Data Terminal Equipment (DTE) and Data Circuit Terminating Equipment (DCE) for terminals operating in Packet Mode and connected to Public Data Networks by dedicated Circuit".

[23] CCITT Recommendation X.21: "Interface between Data Terminal Equipment (DTE) and Data Circuit Terminating Equipment (DCE) for synchronous operation in public data networks".

[24] CCITT Recommendation X.21 bis: "Use on public data networks of data terminal equipment (DTE) which is designed for interfacing to synchronous V‑Series modems".

[25] CCITT Recommendation X.26: "Electrical characteristics for unbalanced double‑current interchange circuits for general use with integrated circuit equipment in the field of data communications".

[26] CCITT Recommendation X.27: "Electrical characteristics for balanced double‑current interchange circuits for general use with integrated circuit equipment in the field of data communications".

[27] CCITT Recommendation X.30: "Support of X.21, X.21 bis and X.20 bis based Data Terminal Equipment (DTEs) by an ISDN".

[28] CCITT Recommendation X.31: "Support of Packet Mode Terminal Equipment in ISDN".

[29] CCITT Recommendation X.32: "Interface between Data Terminal Equipment (DTE) and Data Circuit Terminating Equipment (DCE) for terminals operating in Packet Mode and accessing a PSPDN through a PSTN or an ISDN or a CSPDN".

[30] CCITT Recommendation I.461: "Support of X.21, X.21 bis and X.20 bis based data terminal equipment (DTEs) by integrated services digital network (ISDN)".

[31] CCITT Recommendation I.463: "Support of data terminal equipment (DTEs) with V‑Series type interfaces by an integrated services digital network (ISDN)".

[32] ISO Recommendation 8885: "Information technology ‑ Telecommunication and information exchange between systems ‑ High‑level data link control (HDLC) procedures ‑ General purpose XID frame information field content and format".

[33] ISO Recommendation 8886: "Information technology ‑ Telecommunication and information exchange between systems ‑ Data link service definitions for Open Systems interconnection".

[34] Personal Computer Memory Card Association: "PCMCIA 2.1 or PC‑Card 3.0 electrical specification or later revisions".

[35] Infrared Data Association IrDA "IrPHY Physical layer signalling standard".

[36] TIA‑617: "Data Transmission Systems and Equipment ‑ In‑Band DCE Control".

[37] GSM 02.34: "Digital cellular telecommunications system (Phase 2+); High Speed Circuit Switched Data (HSCSD) – Stage 1".

[38] GSM 03.34: "Digital cellular telecommunications system (Phase 2+); High Speed Circuit Switched Data (HSCSD) -Stage 2 Service Description".

2.1 Abbreviations

In addition to those below abbreviations used in the present document are listed in GSM 01.04 [1].

AU Access Unit

PF Packet Function