27.22.11 CALL CONTROL on PDP Context Activation

31.1243GPPMobile Equipment (ME) conformance test specificationRelease 16TSUniversal Subscriber Identity Module Application Toolkit (USAT) conformance test specification

27.22.11.1 Procedure for Mobile Originated calls

27.22.11.1.1 Definition and applicability

See clause 3.2.2.

27.22.11.1.2 Conformance requirement

The ME shall support the CALL CONTROL for PDP Context Activation facility as defined in:

– TS 31.111 [15] clause 7.3, clause 7.3.1.7, clause 8.72

– TS 24.008 [10], clause 6.1.3.3, 9.5.7 and 9.5.8

– TS 36.508 [33], clause 4.8.4.

27.22.11.1.3 Test purpose

To verify that when the service "call control on GPRS by USIM" is available in the USIM Service Table, then for all PS PDP Context Activation (including those resulting from an OPEN CHANNEL proactive UICC command where UTRAN is selected), the ME shall first pass the corresponding Activate PDP Context message to the UICC, using the ENVELOPE (CALL CONTROL) command. The ME shall also pass to the UICC in the ENVELOPE (CALL CONTROL) command the current serving cell.

To verify that the ME interpret the UICC returns response correctly.

27.22.11.1.4 Method of tests

27.22.11.1.4.1 Initial conditions

The ME is connected to the USIM Simulator and the USS/SS. Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.

The default GERAN/UTRAN/EPC UICC, the default GERAN/UTRAN parameters and the following parameters are used:

Network access name: TestGp.rs

User login: UserLog

User password: UserPwd

UICC/ME interface transport level

Transport format: TCP

Port number: 44444

Data destination address: 01.01.01.01 (as an example)

The GERAN/UTRAN parameters of the system simulator are:

– Mobile Country Code (MCC) = 001;

– Mobile Network Code (MNC) = 01;

– Location Area Code (LAC) = 0001;- Cell Identity Value = 0001;

– The simulator must accept connections requests for APNs: TestGp.rs, Test12.rs and Test13.rs

The elementary files are coded as USIM Application Toolkit default with the following exceptions:

– The call control on GPRS by USIM service is available in the USIM Service Table.

27.22.11.4.2 Procedure

Expected Sequence 1.1 (CALL CONTROL on PDP Context Activation – default PDP connection activation, allowed without modification)

Step

Direction

Message / Action

Comments

0

USER ME

Set and configure APN "TestGp.rs" in the terminal configuration if required.

[see initial conditions]

1

ME UICC

ENVELOPE CALL CONTROL 1.1.1

For default PDP establishment during ATTACH procedure

2

UICC ME

CALL CONTROL RESULT 1.1.1

[Call control result: "Allowed", no modification]

3

ME USS/SS

The PDP connection is established successfully without modification

Same PDP activation parameters used by the ME within the ENVELOPE CALL CONTROL 1.1.1 are used to establish the PDN connection

ENVELOPE CALL CONTROL 1.1.1

Logically:

Device identities

Source device: ME

Destination device: UICC

PDP Context Activation parameters

Protocol Discriminator: GPRS session management messages

Transaction Identifier: 0

Request PDP context activation message identity: Activate PDP context request

Requested NSAPI: NSAPI 5

Requested LLC SAPI: SAPI 3

Requested QoS: Subscribed QoS parameters

Requested PDP address:

PDP type organisation: as declared by the ME

PDP type: as declared by the ME

Address: as declared by the ME

Access point name: 06 54 65 73 74 47 70 02 72 73 ("TestGp.rs")

Protocol configuration options:

Protocol config. optional contents: content not checked

Location Information

MCC: 001

MNC: 01

Location Area Code: 0001

Cell Identity Value: 0001

Extended Cell Identity Value: RNC-id value (for Rel-4 onwards), see also Note 6

Coding:

BER-TLV

D4

Note1

02

02

82

81

52

Note2

0A

41

05

03

0E

 

00

00

00

00

00

00

00

00

00

00

00

00

00

 

00

Note3

28

0A

06

54

65

73

74

47

70

02

72

 

73

Note4

13

Note5

00

F1

10

00

01

00

01

Note6

Note1: Length of BER-TLV, dependant of optional fields.

Note2: Length of PDP context activation parameters, dependant of optional fields.

Note3: Requested PDP Address.

Note4: Optional fields.

Note5: Depending on the presence of the Extended Cell Identity Value the length is ’07’ or ’09’

Note6: The Extended Cell Identity Value is present in Rel-4 and onwards implementations, the values of the two bytes shall not be verified.

CALL CONTROL RESULT 1.1.1

Logically:

Call control result: ’00’ = Allowed, no modification

Coding:

BER-TLV:

00

00

Expected Sequence 1.2 (CALL CONTROL on PDP Context Activation – default PDP connection activation, not allowed)

Step

Direction

Message / Action

Comments

0

USER  ME

Set and configure APN "Test.Gp.rs" in the terminal configuration if required

[see initial conditions]

1

ME  UICC

ENVELOPE CALL CONTROL 1.1.1

For default PDP establishment during ATTACH procedure

2

UICC  ME

CALL CONTROL RESULT 1.2.1

[Call control result: " not Allowed", ]

The ME may retry to send the command.

3

ME  USS/SS

The ME shall not send the Activate PDP Context Request message.

CALL CONTROL RESULT 1.2.1

Logically:

Call control result: ’01’ = not Allowed

Coding:

BER-TLV:

01

00

Expected Sequence 1.3 (CALL CONTROL on PDP Context Activation – default PDP connection activation, allowed with modification)

Step

Direction

Message / Action

Comments

0

USER ME

Set and configure APN "TestGp.rs" in the terminal configuration if required

[see initial conditions]

1

ME UICC

ENVELOPE CALL CONTROL 1.1.1

For default PDP establishment during ATTACH procedure

2

UICC ME

CALL CONTROL RESULT 1.3.1

[Call control result: "Allowed with modifications"]

3

ME USS/SS

The PDP connection is established successfully with modification

Same PDP activation parameters returned by the UICC within the CALL CONTROL RESULT 1.3.1 are used to establish the PDP connection

CALL CONTROL RESULT 1.3.1

Logically:

Call control result: ’02’ = Allowed with modifications

Address:

PDP Context Activation parameters

Protocol Discriminator: GPRS session management messages

Transaction Identifier: 0

Request PDP context activation message identity: Activate PDP context request

Requested NSAPI: NSAPI 5

Requested LLC SAPI: SAPI 3

Requested QoS: Subscribed QoS parameters

Requested PDP address:

PDP type organisation: as declared by the ME

PDP type: as declared by the ME

Address: as declared by the ME

Access point name: 06 54 65 73 74 31 32 02 72 73 ("Test12.rs")

Coding:

BER-TLV:

02

Note1

52

Note2

0A

41

05

03

0E

00

00

00

00

00

00

00

00

00

00

00

00

00

00

Note3

28

0A

06

54

65

73

74

31

32

02

72

73

Note4

Note1: Length of BER-TLV, dependant on optional fields.

Note2: Length dependant on optional fields.

Note3: Requested PDP Address.

Note4: Optional fields.

Expected Sequence 1.4 (CALL CONTROL on PDP Context Activation – PDP connection triggered by user, UICC sends 90 00)

Step

Direction

Message / Action

Comments

0

USER ME

Set and configure APN "Test.Gp.rs" in the terminal configuration if required

[see initial conditions]

1

ME UICC

ENVELOPE CALL CONTROL 1.1.1

For default PDP establishment during ATTACH procedure

Same PDP activation parameters used by the ME within the ENVELOPE CALL CONTROL 1.1.1 are used to establish the PDN connection.

2

UICC ME

90 00

3

USER ME

Set and configure APN "Test12.rs" in the terminal configuration if required, and trigger the ME to perform a PS call to Activate PDP Context Request connection

[see initial conditions]

4

ME UICC

ENVELOPE CALL CONTROL 1.4.1

5

UICC ME

90 00

6

ME USS/SS

ACTIVATE DEFAULT PDP CONTEXT REQUEST

[The UTRAN parameters are used]

7

USS/SS ME

ACTIVATE DEFAULT PDP CONTEXT ACCEPT

8

ME USS/SS

The PDP connection is established successfully without modification

Same PDP activation parameters used by the ME within the ENVELOPE CALL CONTROL 1.4.1 are used to establish the PDN connection

ENVELOPE CALL CONTROL 1.4.1

Logically:

Device identities

Source device: ME

Destination device: UICC

PS PDP connection activation parameters

Protocol Discriminator: GPRS session management messages

Transaction Identifier: 0

Request PDP context activation message identity: Activate PDP context request

Requested NSAPI: NSAPI 5

Requested LLC SAPI: SAPI 3

Requested QoS: Subscribed QoS parameter

Requested PDP address:

PDP type organisation: as declared by the ME

PDP type: as declared by the ME

Address: as declared by the ME

Access Point Name: 06 54 65 73 74 31 32 02 72 73 ( "Test12.rs")

Other Protocol configuration options:

Protocol config. options contents: not checked

Location Information

MCC: 001

MNC: 01

Location Area Code: 0001

Cell Identity Value: 0001

Extended Cell Identity Value: RNC-id value (for Rel-4 onwards), see also Note 6

Coding:

BER-TLV

D4

Note1

02

02

82

81

52

Note2

0A

41

05

03

 

0E

00

00

00

00

00

00

00

00

00

00

00

 

00

00

00

Note3

28

0A

06

54

65

73

74

31

 

32

02

72

73

Note4

13

Note5

00

F1

10

00

01

 

00

01

Note6

Note1: Length of BER-TLV, dependant on optional fields.

Note2: Length of PDP context activation parameters, dependant on optional fields.

Note3: Requested PDP address.

Note4: Optional fields.

Note5: Depending on the presence of the Extended Cell Identity Value the length is ’07’ or ’09’

Note6: The Extended Cell Identity Value is present in Rel-4 and onwards implementations, the values of the two bytes shall not be verified

Expected Sequence 1.5 (CALL CONTROL on PDP Context Activation – PDP connection triggered by user, UICC sends 93 00)

Step

Direction

Message / Action

Comments

0

USER ME

Set and configure APN "Test.Gp.rs" in the terminal configuration if required

[see initial conditions]

1

ME UICC

ENVELOPE CALL CONTROL 1.1.1

For default PDP establishment during ATTACH procedure.

Same EPS PDN activation parameters used by the ME within the ENVELOPE CALL CONTROL 1.1.1 are used to establish the PDN connection.

2

UICC ME

90 00

3

USER ME

Set and configure APN "Test12.rs" in the terminal configuration if required, and trigger the ME to perform a PS call to Activate PDP Context Request connection

[see initial conditions]

4

ME UICC

ENVELOPE CALL CONTROL 1.4.1

5

UICC ME

93 00

The ME may retry to send the command.

6

ME USS/SS

The ME shall not send the Activate PDP Context Request message.

Expected Sequence 1.6 (CALL CONTROL on PDP Context Activation – PDP connection triggered by user, allowed with modification)

Step

Direction

Message / Action

Comments

0

USER ME

Set and configure APN "TestGp.rs" in the terminal configuration if required

[see initial conditions]

1

ME UICC

ENVELOPE CALL CONTROL 1.1.1

For default PDP establishment during ATTACH procedure

Same PDP parameters used by the ME within the ENVELOPE CALL CONTROL 1.1.1 are used to establish the PDP connection.

2

UICC ME

90 00

3

USER ME

Set and configure APN "Test12.rs" in the terminal configuration if required, and trigger the ME to perform a PS call to Activate PDP Context Request connection.

[see initial conditions]

4

ME UICC

ENVELOPE CALL CONTROL 1.4.1

5

UICC ME

CALL CONTROL RESULT 1.6.1

[Call control result: "Allowed with modifications", ]

6

ME USS/SS

ACTIVATE PDP CONTEXT REQUEST

[The UTRAN parameters are used]

7

USS/SS ME

ACTIVATE PDP CONTEXT ACCEPT

8

ME USS/SS

The PDP connection is established successfully with modification

Same PDP parameters returned by the UICC within the CALL CONTROL RESULT 1.6.1 are used to establish the PDP connection.

CALL CONTROL RESULT 1.6.1

Logically:

Call control result: ’02’ = Allowed with modifications

Address:

PDP Context Activation parameters

Protocol Discriminator: GPRS session management messages

Transaction Identifier: 0

Request PDP context activation message identity: Activate PDP context request

Requested NSAPI: NSAPI 5

Requested LLC SAPI: SAPI 3

Requested QoS: Subscribed QoS parameters

Requested PDP address:

PDP type organisation: as declared by the ME

PDP type: as declared by the ME

Address: as declared by the ME

Access point name: 06 54 65 73 74 31 33 02 72 73 ( "Test13.rs")

Coding:

BER-TLV:

02

Note1

52

Note2

0A

41

05

03

0E

00

00

00

00

00

00

00

00

00

00

00

00

00

00

Note3

28

0A

06

54

65

73

74

31

33

02

72

73

Note4

Note1: Length of BER-TLV, dependant on optional fields.

Note2: Length dependant on optional fields.

Note3: Requested PDP address.

Note4: Optional fields.

Expected Sequence 1.7 (CALL CONTROL on PDP Context Activation – PDP connection activation from OPEN CHANNEL command)

Step

Direction

Message / Action

Comments

0

USER ME

Set and configure APN "TestGp.rs" in the terminal configuration if required

[see initial conditions]

1

UICC ME

PROACTIVE COMMAND PENDING: OPEN CHANNEL 1.1.1

2

ME UICC

FETCH

3

UICC ME

PROACTIVE COMMAND: OPEN CHANNEL 1.1.1

4

ME USER

The ME may display channel opening information

5

ME UICC

ENVELOPE CALL CONTROL 1.4.1

6

UICC ME

90 00

7

ME USS/SS

ACTIVATE DEFAULT PDP CONTEXT REQUEST

[The UTRAN parameters are used]

8

USS/SS ME

ACTIVATE DEFAULT PDP CONTEXT ACCEPT

9

ME UICC

TERMINAL RESPONSE: OPEN CHANNEL 1.1.1A

OR

TERMINAL RESPONSE: OPEN CHANNEL 1.1.1B

[Command performed successfully

OR

Command performed with modifications]

10

ME USS/SS

The PDP connection is established successfully without modification

Same PDP parameters used by the ME within the ENVELOPE CALL CONTROL 1.4.1 are used to establish the PDP connection.

PROACTIVE COMMAND: OPEN CHANNEL 1.1.1

Logically:

Command details

Command number: 1

Command type: OPEN CHANNEL

Command qualifier: immediate link establishment

Device identities

Source device: UICC

Destination device: ME

Bearer

Bearer type: GPRS / UTRAN packet service / E-UTRAN

Precedence Class: 03

Delay Class: 04

Reliability Class: 02

Peak throughput class: 09

Mean throughput class: 31

Packet data protocol: 02 (IP)

Buffer

Buffer size: 1400

Network access name: TestGp.rs

Text String: "UserLog" (User login)

Text String: "UserPwd" (User password)

UICC/ME interface transport level

Transport format: TCP

Port number: 44444

Data destination address 01.01.01.01

Coding:

BER-TLV:

D0

42

81

03

01

40

01

82

02

81

82

35

07

02

03

04

02

09

1F

02

39

02

05

78

47

0A

06

54

65

73

74

47

70

02

72

73

0D

08

F4

55

73

65

72

4C

6F

67

0D

08

F4

55

73

65

72

50

77

64

3C

03

02

AD

9C

3E

05

21

01

01

01

01

TERMINAL RESPONSE: OPEN CHANNEL 1.1.1A

Logically:

Command details

Command number: 1

Command type: OPEN CHANNEL

Command qualifier: immediate link establishment

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed successfully

Channel status Channel identifier 1 and link established or PDP context activated

Bearer description

Bearer type: GPRS / UTRAN packet service / E-UTRAN

Bearer parameter: IP (Internet Protocol, IETF STD 5)

Precedence Class: 03

Delay Class: 04

Reliability Class: 02

Peak throughput class: 09

Mean throughput class: 31

Packet data protocol: 02 (IP)

Buffer

Buffer size: 1400

Coding:

BER-TLV:

81

03

01

40

01

82

02

82

81

83

01

00

38

02

81

00

35

07

02

03

04

02

09

1F

02

39

02

05

78

TERMINAL RESPONSE: OPEN CHANNEL 1.1.1B

Logically:

Command details

Command number: 1

Command type: OPEN CHANNEL

Command qualifier: immediate link establishment

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed with modifications

Channel status Channel identifier 1 and link established or PDP context activated

Bearer description

Bearer type: GPRS / UTRAN packet service / E-UTRAN

Bearer parameter: IP (Internet Protocol, IETF STD 5)

Precedence Class: 03

Delay Class: 04

Reliability Class: 02

Peak throughput class: 09

Mean throughput class: 31

Packet data protocol: 02 (IP)

Buffer

Buffer size: 1400

Coding:

BER-TLV:

81

03

01

40

01

82

02

82

81

83

01

07

38

02

81

00

35

07

02

03

04

02

09

1F

02

39

02

05

78

27.22.11.5 Test requirement

The ME shall operate in the manner defined in expected sequences 1.1 to 1.7.