27.22.12 Change eCall mode

31.1243GPPMobile Equipment (ME) conformance test specificationRelease 16TSUniversal Subscriber Identity Module Application Toolkit (USAT) conformance test specification

27.22.12.1 Definition and applicability

See clause 3.2.2.

27.22.12.2 Conformance requirement

The UE shall support eCall feature on the USIM and is able to change the eCall mode as specified in:

– TS 31.102 [14] clause 5.3.40.

27.22.12.3 Test purpose

To verify that the ME is able to change the eCall mode after the re-configuration of the USIM from eCall only support to eCall and Normal call support, or vice versa, by changing the content of the USIM Service Table, and/or by changing the content of the EFEST, where the ME shall be notified of the changes by using the REFRESH proactive command.

27.22.12.4 Method of test

27.22.12.4.1 Initial conditions

The ME is connected to the USIM Simulator and connected to the E-USS or USS.

For test sequences 1.1 – 1.3 the E-UTRAN parameters of the E-USS are:

– Mobile Country Code (MCC) = 246;

– Mobile Network Code (MNC) = 81;

– Tracking Area Code (TAC) = 0001.

For test sequences 1.4 and 1.5 the GERAN or UTRAN parameters of the USS are:

Mobile Country Code (MCC) = 246;

– Mobile Network Code (MNC) = 81;

– Location Area Code (LAC) = 0001.

The elementary files are coded as the default E-UTRAN/EPC UICC, with the following exceptions:

For test sequences 1.1, 1.4:

– EFUST the services (Service n°2) Fixed Dialling Numbers (FDN), (Service n°4) Service Dialling Numbers (SDN) and (Service n°89) eCall Data are available

– EFEST has the Service n°2 Fixed Dialling Numbers (FDN) is enabled

– EFFDN contains only two entries: eCall test number (123) and eCall reconfiguration number (345)

– EFSDN the last two entries contains two entries: eCall test number (456) and eCall reconfiguration number (678)

For test sequences 1.2, and 1.5:

– EFUST the services (Service n°2) Fixed Dialling Numbers (FDN), (Service n°4) Service Dialling Numbers (SDN) and (Service n°89) eCall Data are available

– EFEST has the Service n°2 Fixed Dialling Numbers (FDN) disabled

– EFFDN contains only two entries: eCall test number (123) and eCall reconfiguration number (345)

– EFSDN the last two entries contains two entries: eCall test number (456) and eCall reconfiguration number (678)

For test sequence 1.3:

– EFUST the services (Service n°2) Fixed Dialling Numbers (FDN), (Service n°4) Service Dialling Numbers (SDN), (Service n°99) URI support by UICC and (Service n°112) eCall Data over IMS are available.

– EFEST has the Service n°2 Fixed Dialling Numbers (FDN) enabled

– EFFDNURI contains only two entries: eCall test number (123) and eCall reconfiguration number (345)

– EFSDNURI the last two entries contains two entries: eCall test number (456) and eCall reconfiguration number (678)

PIN of the USIM is disabled.

Prior to this test the ME shall have been powered on, performed the PROFILE DOWNLOAD procedure and registered to the network.

27.22.12.4.2 Procedure

Expected Sequence 1.1 (REFRESH after change eCall mode, disable FDN in EFEST, E-UTRAN)

Step

Direction

MESSAGE / Action

Comments

1

User ME ME E-USS

Set up an eCall

[Call is established using the number in EFFDN]

2

User ME

Call is terminated after a few seconds.

3

User ME

Set up a normal call to "54321"

Steps 3 – 4 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

4

ME User

Call set up not allowed

5

E-USS ME

SMS-PP Data Download

6

ME UICC

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

7

UICC ME

SMS-PP Data Download UICC Acknowledgement

[SW ’90 00′]

8

ME E-USS

SMS-PP Data Download UICC acknowledgement (RP-ACK) message.

9

UICC

EFEST contents state FDN is disabled

[New EFEST value: 00]

10

UICC ME

PROACTIVE COMMAND PENDING: REFRESH 1.1.1

11

ME UICC

FETCH

12

UICC ME

PROACTIVE COMMAND: REFRESH 1.1.1

13

ME UICC

TERMINAL RESPONSE: REFRESH 1.1.1A or

TERMINAL RESPONSE: REFRESH 1.1.1B

[additional EFs read]

14

User ME ME E-USS

Set up an eCall

[Call is established using the number located in EFSDN]

15

User ME

Call is terminated after a few seconds.

16

User ME

Set up a normal call to "54321"

Steps 16 – 18 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

17

ME E-USS

Setup

Call is established

18

User ME

Call is terminated after a few seconds

SMS-PP (Data Download) Message 1.1.1

Logically:

SMS TPDU

TP-MTI SMS-DELIVER

TP-MMS No more messages waiting for the MS in this SC

TP-RP TP-Reply-Path is not set in this SMS-DELIVER

TP-UDHI TP-UD field contains only the short message

TP-SRI A status report will not be returned to the SME

TP-OA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "1234"

TP-PID (U)SIM Data download

TP-DCS

Coding Group General Data Coding

Compression Text is uncompressed

Message Class Class 2 (U)SIM Specific Message

Alphabet 8 bit data

TP-SCTS: 01/01/98 00:00:00 +0

TP-UDL 13

TP-UD "Short Message"

Coding:

Coding

04

04

91

21

43

7F

16

89

10

10

00

00

00

00

0D

53

68

6F

72

74

20

4D

65

73

73

61

67

65

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

Address

TON International number

NPI "ISDN / telephone numbering plan"

Dialling number string "112233445566778"

SMS TPDU

TP-MTI SMS-DELIVER

TP-MMS No more messages waiting for the MS in this SC

TP-RP TP-Reply-Path is not set in this SMS-DELIVER

TP-UDHI TP-UD field contains only the short message

TP-SRI A status report will not be returned to the SME

TP-OA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "1234"

TP-PID (U)SIM Data download

TP-DCS

Coding Group General Data Coding

Compression Text is uncompressed

Message Class Class 2 (U)SIM Specific Message

Alphabet 8 bit data

TP-SCTS: 01/01/98 00:00:00 +0

TP-UDL 13

TP-UD "Short Message"

Coding:

BER-TLV:

D1

2D

82

02

83

81

06

09

91

11

22

33

44

55

66

77

F8

8B

1C

04

04

91

21

43

7F

16

89

10

10

00

00

00

00

0D

53

68

6F

72

74

20

4D

65

73

73

61

67

65

PROACTIVE COMMAND: REFRESH 1.1.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: USIM Initialization and File Change Notification

Device identities

Source device: UICC

Destination device: ME

File List: EF EST

Coding:

BER-TLV:

D0

12

81

03

01

01

02

82

02

81

82

92

07

01

3F

00

7F

FF

6F

56

TERMINAL RESPONSE: REFRESH 1.1.1A

Logically:

Command details

            Command number:        1

            Command type:             REFRESH

            Command qualifier:      USIM Initialization and File Change Notification

Device identities

            Source device:               ME

            Destination device:       UICC

Result

            General Result:              Command performed successfully

Coding:

BER-TLV:

81

03

01

01

02

82

02

82

81

83

01

00

TERMINAL RESPONSE: REFRESH 1.1.1B

Logically:

Command details

            Command number:        1

            Command type:             REFRESH

            Command qualifier:      USIM Initialization and File Change Notification

Device identities

            Source device:               ME

            Destination device:       UICC

Result

            General Result:              REFRESH performed with additional EFs read

Coding:

BER-TLV:

81

03

01

01

02

82

02

82

81

83

01

03

Expected Sequence 1.2 (REFRESH after change eCall mode, enable FDN in EFEST, E-UTRAN)

Step

Direction

MESSAGE / Action

Comments

1

User ME ME E-USS

Set up an eCall

[Call is established and maintained using the number in EFSDN]

2

User ME

Call is terminated after a few seconds.

3

User ME

Set up a normal call to "54321"

Steps 3 – 5 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

4

ME E-USS

Setup

Call is established

5

User ME

Call is terminated after a few seconds

6

E-USS ME

SMS-PP Data Download

7

ME UICC

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

8

UICC ME

SMS-PP Data Download UICC Acknowledgement

[SW ’90 00′]

9

ME E-USS

SMS-PP Data Download UICC Acknowledgement (RP-ACK) message.

10

UICC

EFEST contents state FDN is enabled

[New EFEST value: 01]

11

UICC ME

PROACTIVE COMMAND PENDING: REFRESH 1.2.1

12

ME UICC

FETCH

13

ME UICC

USIM Initialization including send STATUS[P1=’01’]

[ME performs USIM initialization in accordance with TS 31.111 [15] clause 6.4.7]

14

UICC ME

PROACTIVE COMMAND: REFRESH 1.2.1

15

ME UICC

TERMINAL RESPONSE: REFRESH 1.2.1A or

TERMINAL RESPONSE: REFRESH 1.2.1B

[additional EFs read]

16

ME E-USS

Set up an eCall

[Call is established using the number located in EFFDN]

17

User ME

Call is terminated after a few seconds.

18

User ME

Set up a normal call to "54321"

Steps 18 – 19 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

19

ME User

Call set up not allowed

PROACTIVE COMMAND: REFRESH 1.2.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: USIM Initialization and Full File Change Notification

Device identities

Source device: UICC

Destination device: ME

Coding:

BER-TLV:

D0

09

81

03

01

01

00

82

02

81

82

TERMINAL RESPONSE: REFRESH 1.2.1A

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: USIM Initialization and Full file Change Notification

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed successfully

Coding:

BER-TLV:

81

03

01

01

00

82

02

82

81

83

01

00

TERMINAL RESPONSE: REFRESH 1.2.1B

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: USIM Initialization and full File change Notification

Device identities

Source device: ME

Destination device: UICC

Result

General Result: REFRESH performed with additional EFs read

Coding:

BER-TLV:

81

03

01

01

00

82

02

82

81

83

01

03

Expected Sequence 1.3 (REFRESH after changing eCall mode, disable FDN in EFEST, IMS Emergency Services in E-UTRAN)

Step

Direction

MESSAGE / Action

Comments

1

User ME ME E-USS

Set up an eCall

[Call is established using the number in EFFDNURI]

2

User ME

Call is terminated after a few seconds.

3

User ME

Set up a normal call to "54321"

Steps 3 – 4 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

4

ME User

Call set up not allowed

5

E-USS ME

SMS-PP Data Download

6

ME UICC

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

7

UICC ME

SMS-PP Data Download UICC Acknowledgement

[SW ’90 00′]

8

ME E-USS

SMS-PP Data Download UICC acknowledgement (RP-ACK) message.

9

UICC

EFEST contents state FDN is disabled

New EFEST value: 00

10

UICC ME

PROACTIVE COMMAND PENDING: REFRESH 1.1.1

11

ME UICC

FETCH

12

UICC ME

PROACTIVE COMMAND: REFRESH 1.1.1

13

ME UICC

TERMINAL RESPONSE: REFRESH 1.1.1A or

TERMINAL RESPONSE: REFRESH 1.1.1B

[additional EFs read]

14

User ME ME E-USS

Set up an eCall

[Call is established using the number located in EFSDNURI]

15

16

User ME

Call is terminated after a few seconds.

17

User ME

Set up a normal call to "54321"

Steps 17 – 19 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

18

ME E-USS

Setup

Call is established

19

User ME

Call is terminated after a few seconds

Expected Sequence 1.4 (REFRESH after changing eCall mode, disable FDN in EFEST, UTRAN/GERAN)

Step

Direction

MESSAGE / Action

Comments

1

User ME ME USS

Set up an eCall

[Call is established using the number in EFFDN]

2

User ME

Call is terminated after a few seconds

3

User ME

Set up a normal call to "54321"

Steps 3 – 4 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

4

ME User

Call set up not allowed

5

USS ME

SMS-PP Data Download

6

ME UICC

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

7

UICC ME

SMS-PP Data Download UICC Acknowledgement

[SW ’90 00′]

8

ME USS

SMS-PP Data Download UICC acknowledgement (RP-ACK) message.

9

UICC

EFEST contents state FDN is disabled

[New EFEST value: 00]

10

UICC ME

PROACTIVE COMMAND PENDING: REFRESH 1.1.1

ME UICC

FETCH

11

12

UICC ME

PROACTIVE COMMAND: REFRESH 1.1.1

13

ME UICC

TERMINAL RESPONSE: REFRESH 1.1.1A or

TERMINAL RESPONSE: REFRESH 1.1.1B

[additional EFs read]

14

User ME ME USS

Set up an eCall

[Call is established using the number located in EFSDN]

15

User ME

Call is terminated after a few seconds.

16

User ME

Set up a normal call to "54321"

Steps 16 – 18 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

17

ME E-USS

Setup

Call is established

18

User ME

Call is terminated after a few seconds

Expected Sequence 1.5 (REFRESH after change eCall mode, enable FDN in EFEST, UTRAN/GERAN)

Step

Direction

MESSAGE / Action

Comments

1

User ME ME USS

Set up an eCall

[Call is established and maintained using the number in EFSDN.]

2

User ME

Call is terminated after a few seconds.

3

User ME

Set up a normal call to "54321"

Steps 3 – 5 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

4

ME E-USS

Setup

Call is established

5

User ME

Call is terminated after a few seconds

6

USS ME

SMS-PP Data Download

7

ME UICC

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

8

UICC ME

SMS-PP Data Download UICC Acknowledgement

[SW ’90 00′]

9

ME USS

SMS-PP Data Download UICC Acknowledgement (RP-ACK) message.

10

UICC

EFEST contents state FDN is enabled

[New EFEST value: 01]

11

UICC ME

PROACTIVE COMMAND PENDING: REFRESH 1.2.1

12

ME UICC

FETCH

13

ME UICC

USIM Initialization including send STATUS[P1=’01’]

[ME performs USIM initialization in accordance with TS 31.111 [15] clause 6.4.7]

14

UICC ME

PROACTIVE COMMAND: REFRESH 1.2.1

15

ME UICC

TERMINAL RESPONSE: REFRESH 1.2.1A or

TERMINAL RESPONSE: REFRESH 1.2.1B

[additional EFs read]

16

ME USS

Set up an eCall

[Call is established using the number located in EFFDN.]

17

User ME

Call is terminated after a few seconds.

18

User ME

Set up a normal call to "54321"

Steps 18 – 19 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped.

19

ME User

Call set up not allowed

27.22.12.4.3 Test requirement

The ME shall operate in the manner defined in expected sequence 1.1 to 1.5.