5 Information Object Classes

32.7223GPPConfiguration Management (CM)Information Service (IS)Release 11Repeater network resources Integration Reference Point (IRP)Telecommunication managementTS

5.1 Imported information entities and local labels

Label reference

Local label

3GPP TS 32.622 [10], IOC, ManagedElement

ManagedElement

3GPP TS 32.622 [10], IOC, ManagedFunction

ManagedFunction

3GPP TS 32.622 [10], IOC, Top

Top

3GPP TS 32.622 [10], IOC, VsDataContainer

VsDataContainer

5.2 Class diagram

5.2.1 Attributes and relationships

This clause depicts the set of IOCs that encapsulate information relevant for this service. It provides the overview of all IOCs in UML. Subsequent clauses provide more detailed specification of various aspects of these IOCs.

The following figures show the name-containment relation and other types of relations of the Repeater NRM.

Figure 5.2.1.1: Repeater NRM Containment/Naming and Association diagram

NOTE 1: The listed cardinality numbers represent transient as well as steady state numbers, and reflect all managed object creation and deletion scenarios.

NOTE 2: Each instance of the VsDataContainer shall only be contained under one IOC. The VsDataContainer can be contained under IOCs defined in other NRMs.

Figure 5.2.1.2: VsDataContainer Containment/Naming and Association in Repeater NRM diagram

5.2.2 Inheritance

This clause depicts the inheritance relationships that exist between IOCs.

The following figure shows the inheritance hierarchy for the Repeater NRM.

Figure 5.2.2.1: Repeater NRM Inheritance Hierarchy

5.3 Information object class definitions

5.3.1 RepeaterFunction

5.3.1.1 Definition

The current IOC represents the management aspect of repeater. For the information of repeater, see 3GPP TS 25.106 [4].

5.3.1.2 Attributes

Attribute of RepeaterFunction

Attribute name

Visibility

Support Qualifier

Read Qualifier

Write Qualifier

repeaterFunctionId

+

M

M

userLabel

+

M

M

M

Priority

+

M

M

M

latitude

+

M

M

longitude

+

M

M

ctrlConnMode

+

M

M

M

environmentInfo

+

M

M

powerSwitch

+

M

M

M

ulAttenuation

+

M

M

M

dlAttenuation

+

M

M

M

firmwareVer

+

M

M

repeaterType

+

M

M

repeaterFunction-ExternalUtranCell

+

M

M

Notifications of RepeaterFunction

Name

Qualifier

Notes

notifyAttributeValueChange

O

notifyChangedAlarm

See Alarm IRP (3GPP TS 32.111-2 [6])

notifyClearedAlarm

See Alarm IRP (3GPP TS 32.111-2 [6])

notifyNewAlarm

See Alarm IRP (3GPP TS 32.111-2 [6])

notifyObjectCreation

O

notifyObjectDeletion

O

notifyComments

See Alarm IRP (3GPP TS 32.111-2 [6])

notifyAlarmListRebuilt

See Alarm IRP (3GPP TS 32.111-2 [6])

notifyPotentialFaultyAlarmList

See Alarm IRP (3GPP TS 32.111-2 [6])

5.4 Information relationship definitions

5.4.1 ConnectedTo1 (M)

5.4.1.1 Definition

This represents a uni-directional relationship between the repeaterFunction and ExternalUtranCell.
The role of the relation shall be mapped to a reference attribute of the IOC. The names of the reference attribute and the role are the same.

5.4.1.2 Roles

Roles of the relation ConnectedTo1

Name

Definition

repeaterFunction-ExternalUtranCell

This role (when present) represents repeaterFunction capability to identify one ExternalUtranCell.

When the role is absent, the RepeaterFunction.repeaterFunction-ExternalUtranCell shall contain no information.

When present, it shall contain one ExternalUtranCell DN.

5.4.1.3 Constraints

When a particular repeaterFunction identifies a particular UtranCell.

5.5 Information attribute definitions

5.5.1 Definition and legal values

The following table defines the attributes that are present in several Information Object Classes (IOCs) of the present document.

Attributes

Attribute Name

Definition

Legal Values

repeaterFunctionId

An attribute whose "name+value" can be used as an RDN (according to the rules in TS 32.300 [7]) when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance

userLabel

A user-friendly (and user assigned) name of the associated object. Inherited from ManagedFunction.

Priority

the priority of repeater decided by operator

Type: Integer

powerSwitch

Power switch of device which has two status: ON/OFF

Type: Bool

ulAttenuation

Downlink signal attenuation of the device to change downlink gain.

Type: Integer

dlAttenuation

Uplink signal attenuation of the device to change uplink gain

Type: Integer

firmwareVer

Version of device firmware

Type: String

latitude

The latitude of the antenna location based on World Geodetic System (1984 version) global reference frame (WGS 84). Positive values correspond to the northern hemisphere.

A single integral value in the range of -90.0000 to +90.0000.

longitude

The latitude of the antenna location based on World Geodetic System (1984 version) global reference frame (WGS 84). Positive values correspond to degrees east of 0 degrees longitude.

A single integral value in the range of -180.0000 to +180.0000.

ctrlConnMode

Remote communication mode used by repeater to send and receive control message, such as GSM SMS, WCDMA SMS, Circle Switch Data-CSD, Package Switch Dat-IP, Serial port.

Type: String

environmentInfo

the repeater device is located either in the building or out of the building

Type: String

repeaterType

The repeater type defined by operator, such as wide band, frequency selective, indoor and fiber optic.

Type: String

5.5.2 Constraints

None.

Annex A (informative):
Change history

Change history

Date

TSG #

TSG Doc.

CR

R

Subject/Comment

Cat

Old

New

Sep 2006

SA_33

SP-060559

Submitted to TSG SA #33 for Information

1.0.0

Dec 2006

SA_34

SP-060746

Submitted to TSG SA #34 for Approval.

2.0.0

7.0.0

Dec 2008

SA_42

Upgrade to Release 8

7.0.0

8.0.0

Dec 2009

Update to Rel-9 version

8.0.0

9.0.0

2011-03

Update to Rel-10 version (MCC)

9.0.0

10.0.0

2012-09

Update to Rel-11 version (MCC)

10.0.0

11.0.0