5 Mapping
32.6173GPPBulk CM Integration Reference Point (IRP): Bulk CM IRP SOAP Solution Set (SS)Configuration Management (CM)Telecommunication managementTS
5.1 Operation and notification mapping
The Bulk CM IRP IS (3GPP TS 32.612 [4]) defines the operations and their semantics.
Table 5.1 maps the operations defined in the Bulk CM IRP IS to their equivalent types, messages, port type operation, and binding operation in this Solution Set (SS).
Table 5.1 also maps the notifications of the Bulk CM IRP IS, as well as inherited operations.
Table 5.1 also qualifies if an operation is Mandatory (M) or Optional (O).
Table 5.1: Mapping from IS Operation to SS Equivalents
IS Operation in 3GPP TS 32.612 [4] | SS: Operation for WSDL port type and WSDL binding | SS: Port of BulkCMIRPService | Qualifier |
startSession | startSession (note 1) | BulkCMIRPPort | M |
endSession | endSession (note 1) | BulkCMIRPPort | M |
abortSessionOperation | abortSessionOperation (note 1) | BulkCMIRPPort | M |
getSessionIds | getSessionIds (note 1) | BulkCMIRPPort | M |
getSessionStatus | getSessionStatus (note 1) | BulkCMIRPPort | M |
getSessionLog | getSessionLog (note 1) | BulkCMIRPPort | M |
upload | upload (note 1) | BulkCMIRPPort | M |
download | download (note 1) | BulkCMIRPPort | M |
validate | validate (note 1) | BulkCMIRPPort | O |
preactivate | preactivate (note 1) | BulkCMIRPPort | O |
activate | activate (note 1) | BulkCMIRPPort | M |
fallback | fallback (note 1) | BulkCMIRPPort | M |
notifySessionStateChanged | notify (note 2) | NotificationIRPNtfPort | M |
notifyGetSessionLogEnded | notify (note 2) | NotificationIRPNtfPort | M |
getIRPVersion (note 3) | See TS 32.317 [8] | GenericIRPPort | M |
getOperationProfile (note 3) | See TS 32.317 [8] | GenericIRPPort | O |
getNotificationProfile (note 3) | See TS 32.317 [8] | GenericIRPPort | O |
NOTE 1: The operation is under the port type bulkCMIRPSystem:BulkCMIRPPortType and under the binding bulkCMIRPSystem:BulkCMIRPBinding. | |||
NOTE 2: The IS equivalent maps to an XML definition specified in 3GPP TS 32.615 [5], and this being an input parameter to the operation notify under the port type ntfIRPNtfSystem:NotificationIRPNtf and under the binding ntfIRPNtfSystem:NotificationIRPNtf of 3GPP TS 32.307 [10]. This binding is linked to a port of the BulkCMIRPService as indicated in the table above. | |||
NOTE 3: The IS operation is inherited from the ManagedGenericIRP IOC specified in 3GPP TS 32.312 [7]. | |||
5.2 Operation parameter mapping
The Bulk CM IRP IS (3GPP TS 32.612 [4]) defines semantics of parameters carried in operations. The tables below show the mapping of these parameters, as per operation, to their equivalents defined in this SS.
5.2.1 Operation startSession
5.2.1.1 Input parameters
Table 5.2.1.1: Mapping from IS startSession input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
5.2.1.2 Output parameters
Table 5.2.1.2: Mapping from IS startSession output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.1.3 Fault definition
Table 5.2.1.3: Mapping from IS startSession exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.2 Operation endSession
5.2.2.1 Input parameters
Table 5.2.2.1: Mapping from IS endSession input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
5.2.2.2 Output parameters
Table 5.2.2.2: Mapping from IS endSession output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.2.3 Fault definition
Table 5.2.2.3: Mapping from IS endSession exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.3 Operation abortSessionOperation
5.2.3.1 Input parameters
Table 5.2.3.1: Mapping from IS abortSessionOperation input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
5.2.3.2 Output parameters
Table 5.2.3.2: Mapping from IS abortSessionOperation output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.3.3 Fault definition
Table 5.2.3.3: Mapping from IS abortSessionOperation exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.4 Operation getSessionIds
5.2.4.1 Input parameters
None.
5.2.4.2 Output parameters
Table 5.2.4.2: Mapping from IS getSessionIds output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionIdList | sessionIdList | M |
status | status | M |
5.2.4.3 Fault definition
Table 5.2.4.3: Mapping from IS getSessionIds exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.5 Operation getSessionStatus
5.2.5.1 Input parameters
Table 5.2.5.1: Mapping from IS getSessionStatus input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
5.2.5.2 Output parameters
Table 5.2.5.2: Mapping from IS getSessionStatus output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionState | sessionState | M |
status | status | M |
5.2.5.3 Fault definition
Table 5.2.5.3: Mapping from IS getSessionStatus exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.6 Operation getSessionLog
5.2.6.1 Input parameters
Table 5.2.6.1: Mapping from IS getSessionLog input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
logFileReference | logFileReference | M |
contentType | contentType | M |
5.2.6.2 Output parameters
Table 5.2.6.2: Mapping from IS getSessionLog output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.6.3 Fault definition
Table 5.2.6.3: Mapping from IS getSessionLog exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.7 Operation upload
5.2.7.1 Input parameters
Table 5.2.7.1: Mapping from IS upload input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
uploadDataFileReference | uploadDataFileReference | M |
baseObjectInstance | baseObjectInstance | M |
scope | scope | M |
filter | filter | M |
5.2.7.2 Output parameters
Table 5.2.7.2: Mapping from IS upload output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.7.3 Fault definition
Table 5.2.7.3: Mapping from IS upload exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.8 Operation download
5.2.8.1 Input parameters
Table 5.2.8.1: Mapping from IS download input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
downloadDataFileReference | downloadDataFileReference | M |
5.2.8.2 Output parameters
Table 5.2.8.2: Mapping from IS download output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.8.3 Fault definition
Table 5.2.8.3: Mapping from IS download exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.9 Operation validate
5.2.9.1 Input parameters
Table 5.2.9.1: Mapping from IS validate input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
activationMode | activationMode | O |
5.2.9.2 Output parameters
Table 5.2.9.2: Mapping from IS validate output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.9.3 Fault definition
Table 5.2.9.3: Mapping from IS validate exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.10 Operation preactivate
5.2.10.1 Input parameters
Table 5.2.10.1: Mapping from IS preactivate input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
verificationMode | verificationMode | O |
activationMode | activationMode | O |
fallbackEnabled | fallbackEnabled | M |
5.2.10.2 Output parameters
Table 5.2.10.2: Mapping from IS preactivate output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.10.3 Fault definition
Table 5.2.10.3: Mapping from IS preactivate exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.11 Operation activate
5.2.11.1 Input parameters
Table 5.2.11.1: Mapping from IS activate input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
activationMode | activationMode | O |
fallbackEnabled | fallbackEnabled | M |
5.2.11.2 Output parameters
Table 5.2.11.2: Mapping from IS activate output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.11.3 Fault definition
Table 5.2.11.3: Mapping from IS activate exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
5.2.12 Operation fallback
5.2.12.1 Input parameters
Table 5.2.12.1: Mapping from IS fallback input parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding input message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
sessionId | sessionId | M |
5.2.12.2 Output parameters
Table 5.2.12.2: Mapping from IS fallback output parameters to SS equivalents
IS Operation parameter | SS WSDL type sub-element used in corresponding output message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
status | status | M |
5.2.12.3 Fault definition
Table 5.2.12.3: Mapping from IS fallback exceptions to SS equivalents
Assertion name | SS WSDL type enumeration value used in corresponding fault message under corresponding port type operation as indicated in Table 5.1 | Qualifier |
operation_failed | OperationFailed | M |
Annex A (normative):
WSDL specifications
<?xml version="1.0" encoding="UTF-8"?>
<!–
3GPP TS 32.617 Bulk CM IRP SOAP Solution Set
–>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:bulkCMIRPSystem="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#BulkCMIRPSystem" xmlns:bulkCMIRPData="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#BulkCMIRPData" xmlns:xn="http://www.3gpp.org/ftp/specs/archive/32_series/32.625#genericNrm" xmlns:genericIRPSystem="http://www.3gpp.org/ftp/Specs/archive/32_series/32.317/schema/32317-810/GenericIRPSystem" xmlns:ntfIRPNtfSystem="http://www.3gpp.org/ftp/Specs/archive/32_series/32.307/schema/32307-810/notification/NotificationIRPNtfSystem" targetNamespace="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#BulkCMIRPSystem">
<import namespace="http://www.3gpp.org/ftp/Specs/archive/32_series/32.307/schema/32307-810/notification/NotificationIRPNtfSystem" location="http://www.3gpp.org/ftp/Specs/archive/32_series/32.307/schema/32307-810-wsdl.zip"/>
<import namespace="http://www.3gpp.org/ftp/Specs/archive/32_series/32.317/schema/32317-810/GenericIRPSystem" location="http://www.3gpp.org/ftp/Specs/archive/32_series/32.317/schema/32317-810-wsdl.zip"/>
<types>
<schema targetNamespace="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#BulkCMIRPData" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://www.3gpp.org/ftp/specs/archive/32_series/32.625#genericNrm"/>
<!– The following types are defined for the Bulk CM IRP operations –>
<simpleType name="OperationStatusTwo">
<restriction base="string">
<enumeration value="OperationSucceeded"/>
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
<complexType name="SessionIdList">
<sequence>
<element name="sessionId" type="string" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
<simpleType name="SessionState">
<restriction base="string">
<enumeration value="Idle"/>
<enumeration value="UploadInProgress"/>
<enumeration value="UploadFailed"/>
<enumeration value="UploadCompleted"/>
<enumeration value="DownloadInProgress"/>
<enumeration value="DownloadFailed"/>
<enumeration value="DownloadCompleted"/>
<enumeration value="ValidationInProgress"/>
<enumeration value="ValidationFailed"/>
<enumeration value="ValidationCompleted"/>
<enumeration value="PreactivationInProgress"/>
<enumeration value="PreactivationFailed"/>
<enumeration value="PreactivationPartlyRealised"/>
<enumeration value="PreactivationCompleted"/>
<enumeration value="ActivationInProgress"/>
<enumeration value="ActivationFailed"/>
<enumeration value="ActivationPartlyRealised"/>
<enumeration value="ActivationCompleted"/>
<enumeration value="FallbackInProgress"/>
<enumeration value="FallbackFailed"/>
<enumeration value="FallbackPartlyRealised"/>
<enumeration value="FallbackCompleted"/>
</restriction>
</simpleType>
<simpleType name="ContentType">
<restriction base="string">
<enumeration value="CompleteLog"/>
<enumeration value="ErrorsOnly"/>
</restriction>
</simpleType>
<simpleType name="ValueIsNotRelevant">
<restriction base="string">
<enumeration value="ValueIsNotRelevant"/>
</restriction>
</simpleType>
<complexType name="Scope">
<complexType name="Scope">
<sequence>
<element name="level" type="nonNegativeInteger"/>
<choice>
<element name="baseOnly" type="bulkCMIRPData:ValueIsNotRelevant"/>
<element name="baseNthLevel" type="nonNegativeInteger"/>
<element name="baseSubtree" type="nonNegativeInteger"/>
<element name="baseAll" type="bulkCMIRPData:ValueIsNotRelevant"/>
</choice>
</sequence>
</complexType>
<simpleType name="ActivationMode">
<restriction base="string">
<enumeration value="LeastServiceImpact"/>
<enumeration value="LeastElapseTime"/>
<enumeration value="NoIndication"/>
</restriction>
</simpleType>
<simpleType name="VerificationMode">
<restriction base="string">
<enumeration value="FullChecking"/>
<enumeration value="LimitedChecking"/>
</restriction>
</simpleType>
<simpleType name="RequiredOrNot">
<restriction base="string">
<enumeration value="Required"/>
<enumeration value="NotRequired"/>
</restriction>
</simpleType>
<!– startSession Request–>
<element name="startSession">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
</sequence>
</complexType>
</element>
<!– startSession Response –>
<element name="startSessionResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– startSession Fault –>
<element name="startSessionFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– endSession Request–>
<element name="endSession">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
</sequence>
</complexType>
</element>
<!– endSession Response –>
<element name="endSessionResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– endSession Fault –>
<element name="endSessionFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– abortSessionOperation Request–>
<element name="abortSessionOperation">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
</sequence>
</complexType>
</element>
<!– abortSessionOperation Response –>
<element name="abortSessionOperationResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– abortSessionOperation Fault –>
<element name="abortSessionOperationFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– getSessionIds Request–>
<element name="getSessionIds"/>
<!– getSessionIds Response –>
<element name="getSessionIdsResponse">
<complexType>
<sequence>
<element name="sessionIdList" type="bulkCMIRPData:SessionIdList"/>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– No fault message is defined for getSessionIds –>
<!– getSessionStatus Request–>
<element name="getSessionStatus">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
</sequence>
</complexType>
</element>
<!– getSessionStatus Response –>
<element name="getSessionStatusResponse">
<complexType>
<sequence>
<element name="sessionState" type="bulkCMIRPData:SessionState"/>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– getSessionStatus Fault –>
<element name="getSessionStatusFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– getSessionLog Request–>
<element name="getSessionLog">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
<element name="logFileReference" type="string"/>
<element name="contentType" type="bulkCMIRPData:ContentType"/>
</sequence>
</complexType>
</element>
<!– getSessionLog Response –>
<element name="getSessionLogResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– getSessionStatus Fault –>
<element name="getSessionLogFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– upload Request–>
<element name="upload">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
<element name="uploadDataFileReference" type="anyURI"/>
<element name="baseObjectInstance" type="xn:dn"/>
<element name="scope" type="bulkCMIRPData:Scope"/>
<element name="filter" type="string"/>
</sequence>
</complexType>
</element>
<!– upload Response –>
<element name="uploadResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– upload Fault –>
<element name="uploadFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– download Request–>
<element name="download">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
<element name="downloadDataFileReference" type="anyURI"/>
</sequence>
</complexType>
</element>
<!– download Response –>
<element name="downloadResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– download Fault –>
<element name="downloadFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– validate Request–>
<element name="validate">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
<element name="activationMode" type="bulkCMIRPData:ActivationMode" minOccurs="0"/>
</sequence>
</complexType>
</element>
<!– validate Response –>
<element name="validateResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– validate Fault –>
<element name="validateFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– preactivate Request–>
<element name="preactivate">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
<element name="verificationMode" type="bulkCMIRPData:VerificationMode" minOccurs="0"/>
<element name="activationMode" type="bulkCMIRPData:ActivationMode" minOccurs="0"/>
<element name="fallbackEnabled" type="bulkCMIRPData:RequiredOrNot"/>
</sequence>
</complexType>
</element>
<!– preactivate Response –>
<element name="preactivateResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– preactivate Fault –>
<element name="preactivateFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– activate Request–>
<element name="activate">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
<element name="activationMode" type="bulkCMIRPData:ActivationMode" minOccurs="0"/>
<element name="fallbackEnabled" type="bulkCMIRPData:RequiredOrNot"/>
</sequence>
</complexType>
</element>
<!– activate Response –>
<element name="activateResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– activate Fault –>
<element name="activateFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
<!– fallback Request–>
<element name="fallback">
<complexType>
<sequence>
<element name="sessionId" type="string"/>
</sequence>
</complexType>
</element>
<!– fallback Response –>
<element name="fallbackResponse">
<complexType>
<sequence>
<element name="status" type="bulkCMIRPData:OperationStatusTwo"/>
</sequence>
</complexType>
</element>
<!– fallback Fault –>
<element name="fallbackFault">
<simpleType>
<restriction base="string">
<enumeration value="OperationFailed"/>
</restriction>
</simpleType>
</element>
</schema>
</types>
<message name="startSession">
<part name="parameter" element="bulkCMIRPData:startSession"/>
</message>
<message name="startSessionResponse">
<part name="parameter" element="bulkCMIRPData:startSessionResponse"/>
</message>
<message name="startSessionFault">
<part name="parameter" element="bulkCMIRPData:startSessionFault"/>
</message>
<message name="endSession">
<part name="parameter" element="bulkCMIRPData:endSession"/>
</message>
<message name="endSessionResponse">
<part name="parameter" element="bulkCMIRPData:endSessionResponse"/>
</message>
<message name="endSessionFault">
<part name="parameter" element="bulkCMIRPData:endSessionFault"/>
</message>
<message name="abortSessionOperation">
<part name="parameter" element="bulkCMIRPData:abortSessionOperation"/>
</message>
<message name="abortSessionOperationResponse">
<part name="parameter" element="bulkCMIRPData:abortSessionOperationResponse"/>
</message>
<message name="abortSessionOperationFault">
<part name="parameter" element="bulkCMIRPData:abortSessionOperationFault"/>
</message>
<message name="getSessionIds">
<part name="parameter" element="bulkCMIRPData:getSessionIds"/>
</message>
<message name="getSessionIdsResponse">
<part name="parameter" element="bulkCMIRPData:getSessionIdsResponse"/>
</message>
<message name="getSessionStatus">
<part name="parameter" element="bulkCMIRPData:getSessionStatus"/>
</message>
<message name="getSessionStatusResponse">
<part name="parameter" element="bulkCMIRPData:getSessionStatusResponse"/>
</message>
<message name="getSessionStatusFault">
<part name="parameter" element="bulkCMIRPData:getSessionStatusFault"/>
</message>
<message name="getSessionLog">
<part name="parameter" element="bulkCMIRPData:getSessionLog"/>
</message>
<message name="getSessionLogResponse">
<part name="parameter" element="bulkCMIRPData:getSessionLogResponse"/>
</message>
<message name="getSessionLogFault">
<part name="parameter" element="bulkCMIRPData:getSessionLogFault"/>
</message>
<message name="upload">
<part name="parameter" element="bulkCMIRPData:upload"/>
</message>
<message name="uploadResponse">
<part name="parameter" element="bulkCMIRPData:uploadResponse"/>
</message>
<message name="uploadFault">
<part name="parameter" element="bulkCMIRPData:uploadFault"/>
</message>
<message name="download">
<part name="parameter" element="bulkCMIRPData:download"/>
</message>
<message name="downloadResponse">
<part name="parameter" element="bulkCMIRPData:downloadResponse"/>
</message>
<message name="downloadFault">
<part name="parameter" element="bulkCMIRPData:downloadFault"/>
</message>
<message name="validate">
<part name="parameter" element="bulkCMIRPData:validate"/>
</message>
<message name="validateResponse">
<part name="parameter" element="bulkCMIRPData:validateResponse"/>
</message>
<message name="validateFault">
<part name="parameter" element="bulkCMIRPData:validateFault"/>
</message>
<message name="preactivate">
<part name="parameter" element="bulkCMIRPData:preactivate"/>
</message>
<message name="preactivateResponse">
<part name="parameter" element="bulkCMIRPData:preactivateResponse"/>
</message>
<message name="preactivateFault">
<part name="parameter" element="bulkCMIRPData:preactivateFault"/>
</message>
<message name="activate">
<part name="parameter" element="bulkCMIRPData:activate"/>
</message>
<message name="activateResponse">
<part name="parameter" element="bulkCMIRPData:activateResponse"/>
</message>
<message name="activateFault">
<part name="parameter" element="bulkCMIRPData:activateFault"/>
</message>
<message name="fallback">
<part name="parameter" element="bulkCMIRPData:fallback"/>
</message>
<message name="fallbackResponse">
<part name="parameter" element="bulkCMIRPData:fallbackResponse"/>
</message>
<message name="fallbackFault">
<part name="parameter" element="bulkCMIRPData:fallbackFault"/>
</message>
<portType name="BulkCMIRPPortType">
<operation name="startSession">
<input message="bulkCMIRPSystem:startSession"/>
<output message="bulkCMIRPSystem:startSessionResponse"/>
<fault name="startSessionFault" message="bulkCMIRPSystem:startSessionFault"/>
</operation>
<operation name="endSession">
<input message="bulkCMIRPSystem:endSession"/>
<output message="bulkCMIRPSystem:endSessionResponse"/>
<fault name="endSessionFault" message="bulkCMIRPSystem:endSessionFault"/>
</operation>
<operation name="abortSessionOperation">
<input message="bulkCMIRPSystem:abortSessionOperation"/>
<output message="bulkCMIRPSystem:abortSessionOperationResponse"/>
<fault name="abortSessionOperationFault" message="bulkCMIRPSystem:abortSessionOperationFault"/>
</operation>
<operation name="getSessionIds">
<input message="bulkCMIRPSystem:getSessionIds"/>
<output message="bulkCMIRPSystem:getSessionIdsResponse"/>
</operation>
<operation name="getSessionStatus">
<input message="bulkCMIRPSystem:getSessionStatus"/>
<output message="bulkCMIRPSystem:getSessionStatusResponse"/>
<fault name="getSessionStatusFault" message="bulkCMIRPSystem:getSessionStatusFault"/>
</operation>
<operation name="getSessionLog">
<input message="bulkCMIRPSystem:getSessionLog"/>
<output message="bulkCMIRPSystem:getSessionLogResponse"/>
<fault name="getSessionLogFault" message="bulkCMIRPSystem:getSessionLogFault"/>
</operation>
<operation name="upload">
<input message="bulkCMIRPSystem:upload"/>
<output message="bulkCMIRPSystem:uploadResponse"/>
<fault name="uploadFault" message="bulkCMIRPSystem:uploadFault"/>
</operation>
<operation name="download">
<input message="bulkCMIRPSystem:download"/>
<output message="bulkCMIRPSystem:downloadResponse"/>
<fault name="downloadFault" message="bulkCMIRPSystem:downloadFault"/>
</operation>
<operation name="validate">
<input message="bulkCMIRPSystem:validate"/>
<output message="bulkCMIRPSystem:validateResponse"/>
<fault name="validateFault" message="bulkCMIRPSystem:validateFault"/>
</operation>
<operation name="preactivate">
<input message="bulkCMIRPSystem:preactivate"/>
<output message="bulkCMIRPSystem:preactivateResponse"/>
<fault name="preactivateFault" message="bulkCMIRPSystem:preactivateFault"/>
</operation>
<operation name="activate">
<input message="bulkCMIRPSystem:activate"/>
<output message="bulkCMIRPSystem:activateResponse"/>
<fault name="activateFault" message="bulkCMIRPSystem:activateFault"/>
</operation>
<operation name="fallback">
<input message="bulkCMIRPSystem:fallback"/>
<output message="bulkCMIRPSystem:fallbackResponse"/>
<fault name="fallbackFault" message="bulkCMIRPSystem:fallbackFault"/>
</operation>
</portType>
<binding name="BulkCMIRPBinding" type="bulkCMIRPSystem:BulkCMIRPPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="startSession">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#startSession" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="startSessionFault">
<soap:fault name="startSessionFault" use="literal"/>
</fault>
</operation>
<operation name="endSession">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#endSession" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="endSessionFault">
<soap:fault name="endSessionFault" use="literal"/>
</fault>
</operation>
<operation name="abortSessionOperation">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#abortSessionOperation" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="abortSessionOperationFault">
<soap:fault name="abortSessionOperationFault" use="literal"/>
</fault>
</operation>
<operation name="getSessionIds">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#getSessionIds" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<!– No fault message for this operation –>
</operation>
<operation name="getSessionStatus">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#getSessionStatus" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="getSessionStatusFault">
<soap:fault name="getSessionStatusFault" use="literal"/>
</fault>
</operation>
<operation name="getSessionLog">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#getSessionLog" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="getSessionLogFault">
<soap:fault name="getSessionLogFault" use="literal"/>
</fault>
</operation>
<operation name="upload">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#upload" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="uploadFault">
<soap:fault name="uploadFault" use="literal"/>
</fault>
</operation>
<operation name="download">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#download" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="downloadFault">
<soap:fault name="downloadFault" use="literal"/>
</fault>
</operation>
<operation name="validate">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#validate" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="validateFault">
<soap:fault name="validateFault" use="literal"/>
</fault>
</operation>
<operation name="preactivate">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#preactivate" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="preactivateFault">
<soap:fault name="preactivateFault" use="literal"/>
</fault>
</operation>
<operation name="activate">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#activate" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="activateFault">
<soap:fault name="activateFault" use="literal"/>
</fault>
</operation>
<operation name="fallback">
<soap:operation soapAction="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#fallback" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="fallbackFault">
<soap:fault name="fallbackFault" use="literal"/>
</fault>
</operation>
</binding>
<service name="BulkCMIRPService">
<port name="BulkCMIRPPort" binding="bulkCMIRPSystem:BulkCMIRPBinding">
<soap:address location="http://www.3gpp.org/ftp/Specs/archive/32_series/32.617#BulkCMIRP"/>
</port>
<port name="GenericIRPPort" binding="genericIRPSystem:GenericIRPBinding">
<soap:address location="http://www.3gpp.org/ftp/Specs/archive/32_series/32.317#GenericIRP"/>
</port>
<port name="NotificationIRPNtfPort" binding="ntfIRPNtfSystem:NotificationIRPNtf">
<soap:address location="http://www.3gpp.org/ftp/Specs/archive/32_series/32.307#NotificationIRPNtf"/>
</port>
</service>
</definitions>
Annex B (informative):
Void
Annex C (informative):
Change history
Change history | |||||||
Date | TSG # | TSG Doc. | CR | Rev | Subject/Comment | Old | New |
Mar 2009 | SP-43 | SP-090070 | — | — | Presentation to SA for information and approval | 1.0.0 | 8.0.0 |
Dec 2009 | SP-46 | SP-090718 | 001 | — | Increase the linked IS version by the CR for IS to clarify scope parameters for upload operation | 8.0.0 | 8.1.0 |
Dec 2009 | SP-46 | SP-090719 | 001a | — | Discontinuation of the maintenance of WSDL/XML schema folders | 8.1.0 | 9.0.0 |