6.4 RRC multiplicity and type constraint values

36.3313GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Protocol specificationRadio Resource Control (RRC)Release 15TS

– Multiplicity and type constraint definitions

— ASN1START

maxAccessCat-1-r15 INTEGER ::= 63 — Maximum number of Access Categories – 1

maxACDC-Cat-r13 INTEGER ::= 16 — Maximum number of ACDC categories (per PLMN)

maxAvailNarrowBands-r13 INTEGER ::= 16 — Maximum number of narrowbands

maxBandComb-r10 INTEGER ::= 128 — Maximum number of band combinations.

maxBandComb-r11 INTEGER ::= 256 — Maximum number of additional band combinations.

maxBandComb-r13 INTEGER ::= 384 — Maximum number of band combinations in Rel-13

maxBands INTEGER ::= 64 — Maximum number of bands listed in EUTRA UE caps

maxBandsNR-r15 INTEGER ::= 1024 — Maximum number of NR bands listed in EUTRA UE caps

maxBandwidthClass-r10 INTEGER ::= 16 — Maximum number of supported CA BW classes per band

maxBandwidthCombSet-r10 INTEGER ::= 32 — Maximum number of bandwidth combination sets per

— supported band combination

maxBarringInfoSet-r15 INTEGER ::= 8 — Maximum number of UAC barring information sets

maxBT-IdReport-r15 INTEGER ::= 32 — Maximum number of Bluetooth IDs to report

maxBT-Name-r15 INTEGER ::= 4 — Maximum number of Bluetooth name

maxCBR-Level-r14 INTEGER ::= 16 — Maximum number of CBR levels

maxCBR-Level-1-r14 INTEGER ::= 15

maxCBR-Report-r14 INTEGER ::= 72 — Maximum number of CBR results in a report

maxCDMA-BandClass INTEGER ::= 32 — Maximum value of the CDMA band classes

maxCE-Level-r13 INTEGER ::= 4 — Maximum number of CE levels

maxCellBlack INTEGER ::= 16 — Maximum number of blacklisted physical cell identity

— ranges listed in SIB type 4 and 5

maxCellHistory-r12 INTEGER ::= 16 — Maximum number of visited EUTRA cells reported

maxCellInfoGERAN-r9 INTEGER ::= 32 — Maximum number of GERAN cells for which system in-

— formation can be provided as redirection assistance

maxCellInfoUTRA-r9 INTEGER ::= 16 — Maximum number of UTRA cells for which system

— information can be provided as redirection

— assistance

maxCellMeasIdle-r15 INTEGER ::= 8 — Maximum number of neighbouring inter-frequency

— cells per carrier measured in IDLE mode

maxCombIDC-r11 INTEGER ::= 128 — Maximum number of reported UL CA or

— MR-DC combinations

maxCSI-IM-r11 INTEGER ::= 3 — Maximum number of CSI-IM configurations

— (per carrier frequency)

maxCSI-IM-r12 INTEGER ::= 4 — Maximum number of CSI-IM configurations

— (per carrier frequency)

minCSI-IM-r13 INTEGER ::= 5 — Minimum number of CSI IM configurations from which

— REL-13 extension is used

maxCSI-IM-r13 INTEGER ::= 24 — Maximum number of CSI-IM configurations

— (per carrier frequency)

maxCSI-IM-v1310 INTEGER ::= 20 — Maximum number of additional CSI-IM configurations

— (per carrier frequency)

maxCSI-Proc-r11 INTEGER ::= 4 — Maximum number of CSI processes (per carrier

— frequency)

maxCSI-RS-NZP-r11 INTEGER ::= 3 — Maximum number of CSI RS resource

— configurations using non-zero Tx power

— (per carrier frequency)

minCSI-RS-NZP-r13 INTEGER ::= 4 — Minimum number of CSI RS resource from which

— REL-13 extension is used

maxCSI-RS-NZP-r13 INTEGER ::= 24 — Maximum number of CSI RS resource

— configurations using non-zero Tx power

— (per carrier frequency)

maxCSI-RS-NZP-v1310 INTEGER ::= 21 — Maximum number of additional CSI RS resource

— configurations using non-zero Tx power

— (per carrier frequency)

maxCSI-RS-ZP-r11 INTEGER ::= 4 — Maximum number of CSI RS resource

— configurations using zero Tx power(per carrier

— frequency)

maxCQI-ProcExt-r11 INTEGER ::= 3 — Maximum number of additional periodic CQI

— configurations (per carrier frequency)

maxFreqUTRA-TDD-r10 INTEGER ::= 6 — Maximum number of UTRA TDD carrier frequencies for

— which system information can be provided as

— redirection assistance

maxCellInter INTEGER ::= 16 — Maximum number of neighbouring inter-frequency

— cells listed in SIB type 5

maxCellIntra INTEGER ::= 16 — Maximum number of neighbouring intra-frequency

— cells listed in SIB type 4

maxCellListGERAN INTEGER ::= 3 — Maximum number of lists of GERAN cells

maxCellMeas INTEGER ::= 32 — Maximum number of entries in each of the

— cell lists in a measurement object

maxCellReport INTEGER ::= 8 — Maximum number of reported cells/CSI-RS resources

maxCellSFTD INTEGER ::= 3 — Maximum number of cells for SFTD reporting

maxConfigSPS-r14 INTEGER ::= 8 — Maximum number of simultaneous SPS configurations

maxConfigSPS-r15 INTEGER ::= 6 — Maximum number of simultaneous SPS configurations

— configured with SPS C-RNTI

maxCSI-RS-Meas-r12 INTEGER ::= 96 — Maximum number of entries in the CSI-RS list

— in a measurement object

maxDRB INTEGER ::= 11 — Maximum number of Data Radio Bearers

maxDRBExt-r15 INTEGER ::= 4 — Maximum number of additional DRBs

maxDRB-r15 INTEGER ::= 15 — Highest value of extended maximum number of DRBs

maxDS-Duration-r12 INTEGER ::= 5 — Maximum number of subframes in a discovery signals

— occasion

maxDS-ZTP-CSI-RS-r12 INTEGER ::= 5 — Maximum number of zero transmission power CSI-RS for

— a serving cell concerning discovery signals

maxEARFCN INTEGER ::= 65535 — Maximum value of EUTRA carrier frequency

maxEARFCN-Plus1 INTEGER ::= 65536 — Lowest value extended EARFCN range

maxEARFCN2 INTEGER ::= 262143 — Highest value extended EARFCN range

maxEPDCCH-Set-r11 INTEGER ::= 2 — Maximum number of EPDCCH sets

maxFBI INTEGER ::= 64 — Maximum value of fequency band indicator

maxFBI-NR-r15 INTEGER ::= 1024 — Highest value FBI range for NR.

maxFBI-Plus1 INTEGER ::= 65 — Lowest value extended FBI range

maxFBI2 INTEGER ::= 256 — Highest value extended FBI range

maxFeatureSets-r15 INTEGER ::= 256 — Total number of feature sets (size of pool)

maxPerCC-FeatureSets-r15 INTEGER ::= 32 — Total number of CC-specific feature sets

— (size of the pool)

maxFreq INTEGER ::= 8 — Maximum number of carrier frequencies

maxFreqIDC-r11 INTEGER ::= 32 — Maximum number of carrier frequencies that are

— affected by the IDC problems

maxFreqIdle-r15 INTEGER ::= 8 — Maximum number of carrier frequencies for

— IDLE mode measurements configured by eNB

maxFreqMBMS-r11 INTEGER ::= 5 — Maximum number of carrier frequencies for which an

— MBMS capable UE may indicate an interest

maxFreqNR-r15 INTEGER ::= 5 — Maximum number of NR carrier frequencies for

— which a UE may provide measurement results upon

— NR SCG failure

maxFreqV2X-r14 INTEGER ::= 8 — Maximum number of carrier frequencies for which V2X

— sidelink communication can be configured

maxFreqV2X-1-r14 INTEGER ::= 7 — Highest index of frequencies

maxGERAN-SI INTEGER ::= 10 — Maximum number of GERAN SI blocks that can be

— provided as part of NACC information

maxGNFG INTEGER ::= 16 — Maximum number of GERAN neighbour freq groups

maxIdleMeasCarriers-r15 INTEGER ::= 3 — Maximum number of neighbouring inter-

— frequency carriers measured in IDLE mode

maxLCG-r13 INTEGER ::= 4 — Maximum number of logical channel groups

maxLogMeasReport-r10 INTEGER ::= 520 — Maximum number of logged measurement entries

— that can be reported by the UE in one message

maxMBSFN-Allocations INTEGER ::= 8 — Maximum number of MBSFN frame allocations with

— different offset

maxMBSFN-Area INTEGER ::= 8

maxMBSFN-Area-1 INTEGER ::= 7

maxMBMS-ServiceListPerUE-r13 INTEGER ::= 15 — Maximum number of services which the UE can

— include in the MBMS interest indication

maxMeasId INTEGER ::= 32

maxMeasId-Plus1 INTEGER ::= 33

maxMeasId-r12 INTEGER ::= 64

maxMultiBands INTEGER ::= 8 — Maximum number of additional frequency bands

— that a cell belongs to

maxMultiBandsNR-r15 INTEGER ::= 32 — Maximum number of additional NR frequency bands

— that a cell belongs to

maxMultiBandsNR-1-r15 INTEGER ::= 31

maxNS-Pmax-r10 INTEGER ::= 8 — Maximum number of NS and P-Max values per band

maxNAICS-Entries-r12 INTEGER ::= 8 — Maximum number of supported NAICS combination(s)

maxNeighCell-r12 INTEGER ::= 8 — Maximum number of neighbouring cells in NAICS

— configuration (per carrier frequency)

maxNeighCell-SCPTM-r13 INTEGER ::= 8 — Maximum number of SCPTM neighbour cells

maxNrofS-NSSAI-r15 INTEGER ::= 8 — Maximum number of S-NSSAI

maxObjectId INTEGER ::= 32

maxObjectId-Plus1-r13 INTEGER ::= 33

maxObjectId-r13 INTEGER ::= 64

maxP-a-PerNeighCell-r12 INTEGER ::= 3 — Maximum number of power offsets for a neighbour cell

— in NAICS configuration

maxPageRec INTEGER ::= 16 —

maxPhysCellIdRange-r9 INTEGER ::= 4 — Maximum number of physical cell identity ranges

maxPLMN-r11 INTEGER ::= 6 — Maximum number of PLMNs

maxPLMN-1-r14 INTEGER ::= 5 — Maximum number of PLMNs minus one

maxPLMN-r15 INTEGER ::= 8 — Maximum number of PLMNs for RNA configuration

maxPLMN-NR-r15 INTEGER ::= 12 — Maximum number of NR PLMNs

maxPNOffset INTEGER ::= 511 — Maximum number of CDMA2000 PNOffsets

maxPMCH-PerMBSFN INTEGER ::= 15

maxPSSCH-TxConfig-r14 INTEGER ::= 16 — Maximum number of PSSCH TX configurations

maxQuantSetsNR-r15 INTEGER ::= 2 — Maximum number of NR quantity configuration sets

maxQCI-r13 INTEGER ::= 6 — Maximum number of QCIs

maxRAT-Capabilities INTEGER ::= 8 — Maximum number of interworking RATs (incl EUTRA)

maxRE-MapQCL-r11 INTEGER ::= 4 — Maximum number of PDSCH RE Mapping configurations

— (per carrier frequency)

maxReportConfigId INTEGER ::= 32

maxReservationPeriod-r14 INTEGER ::= 16 — Maximum number of resource reservation periodicities

— for sidelink V2X communication

maxRS-Index-r15 INTEGER ::= 64 — Maximum number of RS indices

maxRS-Index-1-r15 INTEGER ::= 63 — Highest value of RS index as used to identify

— RS index in RRM reports.

maxRS-IndexCellQual-r15 INTEGER ::= 16 — Maximum number of RS indices averaged to derive

— cell quality for RRM.

maxRS-IndexReport-r15 INTEGER ::= 32 — Maximum number of RS indices for RRM.

maxRSTD-Freq-r10 INTEGER ::= 3 — Maximum number of frequency layers for RSTD

— measurement

maxSAI-MBMS-r11 INTEGER ::= 64 — Maximum number of MBMS service area identities

— broadcast per carrier frequency

maxSCell-r10 INTEGER ::= 4 — Maximum number of SCells

maxSCell-r13 INTEGER ::= 31 — Highest value of extended number range of SCells

maxSCellGroups-r15 INTEGER ::= 4 — Maximum number of SCell common parameter groups

maxSC-MTCH-r13 INTEGER ::= 1023 — Maximum number of SC-MTCHs in one cell

maxSC-MTCH-BR-r14 INTEGER ::= 128 — Maximum number of SC-MTCHs in one cell for feMTC

maxSL-CommRxPoolNFreq-r13 INTEGER ::= 32 — Maximum number of individual sidelink communication

— Rx resource pools on neighbouring freq

maxSL-CommRxPoolPreconf-v1310 INTEGER ::= 12 — Maximum number of additional preconfigured

— sidelink communication Rx resource pool entries

maxSL-TxPool-r12Plus1-r13 INTEGER ::= 5 — First additional individual sidelink

— Tx resource pool

maxSL-TxPool-v1310 INTEGER ::= 4 — Maximum number of additional sidelink

— Tx resource pool entries

maxSL-TxPool-r13 INTEGER ::= 8 — Maximum number of individual sidelink

— Tx resource pools

maxSL-CommTxPoolPreconf-v1310 INTEGER ::= 7 — Maximum number of additional preconfigured

— sidelink Tx resource pool entries

maxSL-Dest-r12 INTEGER ::= 16 — Maximum number of sidelink destinations

maxSL-DiscCells-r13 INTEGER ::= 16 — Maximum number of cells with similar sidelink

— configurations

maxSL-DiscPowerClass-r12 INTEGER ::= 3 — Maximum number of sidelink power classes

maxSL-DiscRxPoolPreconf-r13 INTEGER ::= 16 — Maximum number of preconfigured sidelink

— discovery Rx resource pool entries

maxSL-DiscSysInfoReportFreq-r13 INTEGER ::= 8 — Maximum number of frequencies to include in a

— SidelinkUEInformation for SI reporting

maxSL-DiscTxPoolPreconf-r13 INTEGER ::= 4 — Maximum number of preconfigured sidelink

— discovery Tx resource pool entries

maxSL-GP-r13 INTEGER ::= 8 — Maximum number of gap patterns that can be requested

— for a frequency or assigned

maxSL-PoolToMeasure-r14 INTEGER ::= 72 — Maximum number of TX resource pools for CBR

— measurement and report

maxSL-Prio-r13 INTEGER ::= 8 — Maximum number of entries in sidelink priority list

maxSL-RxPool-r12 INTEGER ::= 16 — Maximum number of individual sidelink Rx resource pools

maxSL-Reliability-r15 INTEGER ::= 8 — Maximum number of entries in sidelink reliability list

maxSL-SyncConfig-r12 INTEGER ::= 16 — Maximum number of sidelink Sync configurations

maxSL-TF-IndexPair-r12 INTEGER ::= 64 — Maximum number of sidelink Time Freq resource index

— pairs

maxSL-TxPool-r12 INTEGER ::= 4 — Maximum number of individual sidelink Tx resource pools

maxSL-V2X-RxPool-r14 INTEGER ::= 16 — Maximum number of RX resource pools for

— V2X sidelink communication

maxSL-V2X-RxPoolPreconf-r14 INTEGER ::= 16 — Maximum number of RX resource pools for

— V2X sidelink communication

maxSL-V2X-TxPool-r14 INTEGER ::= 8 — Maximum number of TX resource pools for

— V2X sidelink communication

maxSL-V2X-TxPoolPreconf-r14 INTEGER ::= 8 — Maximum number of TX resource pools for

— V2X sidelink communication

maxSL-V2X-SyncConfig-r14 INTEGER ::= 16 — Maximum number of sidelink Sync configurations

— for V2X sidelink communication

maxSL-V2X-CBRConfig-r14 INTEGER ::= 4 — Maximum number of CBR range configurations

— for V2X sidelink communication congestion

— control

maxSL-V2X-CBRConfig-1-r14 INTEGER ::= 3

maxSL-V2X-TxConfig-r14 INTEGER ::= 64 — Maximum number of TX parameter configurations

— for V2X sidelink communication congestion

— control

maxSL-V2X-TxConfig-1-r14 INTEGER ::= 63

maxSL-V2X-CBRConfig2-r14 INTEGER ::= 8 — Maximum number of CBR range configurations in

— pre-configuration for V2X sidelink

— communication congestion control

maxSL-V2X-CBRConfig2-1-r14 INTEGER ::= 7

maxSL-V2X-TxConfig2-r14 INTEGER ::= 128 — Maximum number of TX parameter

— configurations in pre-configuration for V2X

— sidelink communication congestion control

maxSL-V2X-TxConfig2-1-r14 INTEGER ::= 127

maxSTAG-r11 INTEGER ::= 3 — Maximum number of STAGs

maxServCell-r10 INTEGER ::= 5 — Maximum number of Serving cells

maxServCell-r13 INTEGER ::= 32 — Highest value of extended number range of Serving cells

maxServCellNR-r15 INTEGER ::= 16 — Maximum number of NR serving cells

maxServiceCount INTEGER ::= 16 — Maximum number of MBMS services that can be included

— in an MBMS counting request and response

maxServiceCount-1 INTEGER ::= 15

maxSessionPerPMCH INTEGER ::= 29

maxSessionPerPMCH-1 INTEGER ::= 28

maxSIB INTEGER ::= 32 — Maximum number of SIBs

maxSIB-1 INTEGER ::= 31

maxSI-Message INTEGER ::= 32 — Maximum number of SI messages

maxSimultaneousBands-r10 INTEGER ::= 64 — Maximum number of simultaneously aggregated bands

maxSubframePatternIDC-r11 INTEGER ::= 8 — Maximum number of subframe reservation patterns

— that the UE can simultaneously recommend to the

— E-UTRAN for use.

maxTrafficPattern-r14 INTEGER ::= 8 — Maximum number of periodical traffic patterns

— that the UE can simultaneously report to the

— E-UTRAN.

maxUTRA-FDD-Carrier INTEGER ::= 16 — Maximum number of UTRA FDD carrier frequencies

maxUTRA-TDD-Carrier INTEGER ::= 16 — Maximum number of UTRA TDD carrier frequencies

maxWayPoint-r15 INTEGER ::= 20 — Maximum number of flight path information waypoints

maxWLAN-Id-r12 INTEGER ::= 16 — Maximum number of WLAN identifiers

maxWLAN-Bands-r13 INTEGER ::= 8 — Maximum number of WLAN bands

maxWLAN-Id-r13 INTEGER ::= 32 — Maximum number of WLAN identifiers

maxWLAN-Channels-r13 INTEGER ::= 16 — maximum number of WLAN channels used in

— WLAN-CarrierInfo

maxWLAN-CarrierInfo-r13 INTEGER ::= 8 — Maximum number of WLAN Carrier Information

maxWLAN-Id-Report-r14 INTEGER ::= 32 — Maximum number of WLAN IDs to report

maxWLAN-Name-r15 INTEGER ::= 4 — Maximum number of WLAN name

— ASN1STOP

NOTE: The value of maxDRB aligns with SA2.

– End of EUTRA-RRC-Definitions

— ASN1START

END

— ASN1STOP