6.4 RRC multiplicity and type constraint values

38.3313GPPNRProtocol specificationRadio Resource Control (RRC)Release 15TS

– Multiplicity and type constraint definitions

— ASN1START

— TAG-MULTIPLICITY-AND-TYPE-CONSTRAINT-DEFINITIONS-START

maxBandComb INTEGER ::= 65536 — Maximum number of DL band combinations

maxCellBlack INTEGER ::= 16 — Maximum number of NR blacklisted cell ranges in SIB3, SIB4

maxCellInter INTEGER ::= 16 — Maximum number of inter-Freq cells listed in SIB4

maxCellIntra INTEGER ::= 16 — Maximum number of intra-Freq cells listed in SIB3

maxCellMeasEUTRA INTEGER ::= 32 — Maximum number of cells in E-UTRAN

maxEARFCN INTEGER ::= 262143 — Maximum value of E-UTRA carrier frequency

maxEUTRA-CellBlack INTEGER ::= 16 — Maximum number of E-UTRA blacklisted physical cell identity ranges

— in SIB5

maxEUTRA-NS-Pmax INTEGER ::= 8 — Maximum number of NS and P-Max values per band

maxMultiBands INTEGER ::= 8 — Maximum number of additional frequency bands that a cell belongs to

maxNARFCN INTEGER ::= 3279165 — Maximum value of NR carrier frequency

maxNR-NS-Pmax INTEGER ::= 8 — Maximum number of NS and P-Max values per band

maxNrofServingCells INTEGER ::= 32 — Max number of serving cells (SpCells + SCells)

maxNrofServingCells-1 INTEGER ::= 31 — Max number of serving cells (SpCell + SCells) minus 1

maxNrofAggregatedCellsPerCellGroup INTEGER ::= 16

maxNrofSCells INTEGER ::= 31 — Max number of secondary serving cells per cell group

maxNrofCellMeas INTEGER ::= 32 — Maximum number of entries in each of the cell lists in a measurement

— object

maxNrofSS-BlocksToAverage INTEGER ::= 16 — Max number for the (max) number of SS blocks to average to determine cell

— measurement

maxNrofCSI-RS-ResourcesToAverage INTEGER ::= 16 — Max number for the (max) number of CSI-RS to average to determine cell

— measurement

maxNrofDL-Allocations INTEGER ::= 16 — Maximum number of PDSCH time domain resource allocations

maxNrofSR-ConfigPerCellGroup INTEGER ::= 8 — Maximum number of SR configurations per cell group

maxLCG-ID INTEGER ::= 7 — Maximum value of LCG ID

maxLC-ID INTEGER ::= 32 — Maximum value of Logical Channel ID

maxNrofTAGs INTEGER ::= 4 — Maximum number of Timing Advance Groups

maxNrofTAGs-1 INTEGER ::= 3 — Maximum number of Timing Advance Groups minus 1

maxNrofBWPs INTEGER ::= 4 — Maximum number of BWPs per serving cell

maxNrofCombIDC INTEGER ::= 128 — Maximum number of reported MR-DC combinations for IDC

maxNrofSymbols-1 INTEGER ::= 13 — Maximum index identifying a symbol within a slot (14 symbols, indexed

— from 0..13)

maxNrofSlots INTEGER ::= 320 — Maximum number of slots in a 10 ms period

maxNrofSlots-1 INTEGER ::= 319 — Maximum number of slots in a 10 ms period minus 1

maxNrofPhysicalResourceBlocks INTEGER ::= 275 — Maximum number of PRBs

maxNrofPhysicalResourceBlocks-1 INTEGER ::= 274 — Maximum number of PRBs minus 1

maxNrofPhysicalResourceBlocksPlus1 INTEGER ::= 276 — Maximum number of PRBs plus 1

maxNrofControlResourceSets-1 INTEGER ::= 11 — Max number of CoReSets configurable on a serving cell minus 1

maxCoReSetDuration INTEGER ::= 3 — Max number of OFDM symbols in a control resource set

maxNrofSearchSpaces-1 INTEGER ::= 39 — Max number of Search Spaces minus 1

maxSFI-DCI-PayloadSize INTEGER ::= 128 — Max number payload of a DCI scrambled with SFI-RNTI

maxSFI-DCI-PayloadSize-1 INTEGER ::= 127 — Max number payload of a DCI scrambled with SFI-RNTI minus 1

maxINT-DCI-PayloadSize INTEGER ::= 126 — Max number payload of a DCI scrambled with INT-RNTI

maxINT-DCI-PayloadSize-1 INTEGER ::= 125 — Max number payload of a DCI scrambled with INT-RNTI minus 1

maxNrofRateMatchPatterns INTEGER ::= 4 — Max number of rate matching patterns that may be configured

maxNrofRateMatchPatterns-1 INTEGER ::= 3 — Max number of rate matching patterns that may be configured minus 1

maxNrofRateMatchPatternsPerGroup INTEGER ::= 8 — Max number of rate matching patterns that may be configured in one group

maxNrofCSI-ReportConfigurations INTEGER ::= 48 — Maximum number of report configurations

maxNrofCSI-ReportConfigurations-1 INTEGER ::= 47 — Maximum number of report configurations minus 1

maxNrofCSI-ResourceConfigurations INTEGER ::= 112 — Maximum number of resource configurations

maxNrofCSI-ResourceConfigurations-1 INTEGER ::= 111 — Maximum number of resource configurations minus 1

maxNrofAP-CSI-RS-ResourcesPerSet INTEGER ::= 16

maxNrOfCSI-AperiodicTriggers INTEGER ::= 128 — Maximum number of triggers for aperiodic CSI reporting

maxNrofReportConfigPerAperiodicTrigger INTEGER ::= 16 — Maximum number of report configurations per trigger state for aperiodic

— reporting

maxNrofNZP-CSI-RS-Resources INTEGER ::= 192 — Maximum number of Non-Zero-Power (NZP) CSI-RS resources

maxNrofNZP-CSI-RS-Resources-1 INTEGER ::= 191 — Maximum number of Non-Zero-Power (NZP) CSI-RS resources minus 1

maxNrofNZP-CSI-RS-ResourcesPerSet INTEGER ::= 64 — Maximum number of NZP CSI-RS resources per resource set

maxNrofNZP-CSI-RS-ResourceSets INTEGER ::= 64 — Maximum number of NZP CSI-RS resource sets per cell

maxNrofNZP-CSI-RS-ResourceSets-1 INTEGER ::= 63 — Maximum number of NZP CSI-RS resource sets per cell minus 1

maxNrofNZP-CSI-RS-ResourceSetsPerConfig INTEGER ::= 16 — Maximum number of resource sets per resource configuration

maxNrofNZP-CSI-RS-ResourcesPerConfig INTEGER ::= 128 — Maximum number of resources per resource configuration

maxNrofZP-CSI-RS-Resources INTEGER ::= 32 — Maximum number of Zero-Power (ZP) CSI-RS resources

maxNrofZP-CSI-RS-Resources-1 INTEGER ::= 31 — Maximum number of Zero-Power (ZP) CSI-RS resources minus 1

maxNrofZP-CSI-RS-ResourceSets-1 INTEGER ::= 15

maxNrofZP-CSI-RS-ResourcesPerSet INTEGER ::= 16

maxNrofZP-CSI-RS-ResourceSets INTEGER ::= 16

maxNrofCSI-IM-Resources INTEGER ::= 32 — Maximum number of CSI-IM resources

maxNrofCSI-IM-Resources-1 INTEGER ::= 31 — Maximum number of CSI-IM resources minus 1

maxNrofCSI-IM-ResourcesPerSet INTEGER ::= 8 — Maximum number of CSI-IM resources per set

maxNrofCSI-IM-ResourceSets INTEGER ::= 64 — Maximum number of NZP CSI-IM resource sets per cell

maxNrofCSI-IM-ResourceSets-1 INTEGER ::= 63 — Maximum number of NZP CSI-IM resource sets per cell minus 1

maxNrofCSI-IM-ResourceSetsPerConfig INTEGER ::= 16 — Maximum number of CSI IM resource sets per resource configuration

maxNrofCSI-SSB-ResourcePerSet INTEGER ::= 64 — Maximum number of SSB resources in a resource set

maxNrofCSI-SSB-ResourceSets INTEGER ::= 64 — Maximum number of CSI SSB resource sets per cell

maxNrofCSI-SSB-ResourceSets-1 INTEGER ::= 63 — Maximum number of CSI SSB resource sets per cell minus 1

maxNrofCSI-SSB-ResourceSetsPerConfig INTEGER ::= 1 — Maximum number of CSI SSB resource sets per resource configuration

maxNrofFailureDetectionResources INTEGER ::= 10 — Maximum number of failure detection resources

maxNrofFailureDetectionResources-1 INTEGER ::= 9 — Maximum number of failure detection resources minus 1

maxNrofObjectId INTEGER ::= 64 — Maximum number of measurement objects

maxNrofPageRec INTEGER ::= 32 — Maximum number of page records

maxNrofPCI-Ranges INTEGER ::= 8 — Maximum number of PCI ranges

maxPLMN INTEGER ::= 12 — Maximum number of PLMNs broadcast and reported by UE at establisghment

maxNrofCSI-RS-ResourcesRRM INTEGER ::= 96 — Maximum number of CSI-RS resources for an RRM measurement object

maxNrofCSI-RS-ResourcesRRM-1 INTEGER ::= 95 — Maximum number of CSI-RS resources for an RRM measurement object minus 1

maxNrofMeasId INTEGER ::= 64 — Maximum number of configured measurements

maxNrofQuantityConfig INTEGER ::= 2 — Maximum number of quantity configurations

maxNrofCSI-RS-CellsRRM INTEGER ::= 96 — Maximum number of cells with CSI-RS resources for an RRM measurement

— object

maxNrofSRS-ResourceSets INTEGER ::= 16 — Maximum number of SRS resource sets in a BWP.

maxNrofSRS-ResourceSets-1 INTEGER ::= 15 — Maximum number of SRS resource sets in a BWP minus 1.

maxNrofSRS-Resources INTEGER ::= 64 — Maximum number of SRS resources.

maxNrofSRS-Resources-1 INTEGER ::= 63 — Maximum number of SRS resources minus 1.

maxNrofSRS-ResourcesPerSet INTEGER ::= 16 — Maximum number of SRS resources in an SRS resource set

maxNrofSRS-TriggerStates-1 INTEGER ::= 3 — Maximum number of SRS trigger states minus 1, i.e., the largest code

— point.

maxNrofSRS-TriggerStates-2 INTEGER ::= 2 — Maximum number of SRS trigger states minus 2.

maxRAT-CapabilityContainers INTEGER ::= 8 — Maximum number of interworking RAT containers (incl NR and MRDC)

maxSimultaneousBands INTEGER ::= 32 — Maximum number of simultaneously aggregated bands

maxNrofSlotFormatCombinationsPerSet INTEGER ::= 512 — Maximum number of Slot Format Combinations in a SF-Set.

maxNrofSlotFormatCombinationsPerSet-1 INTEGER ::= 511 — Maximum number of Slot Format Combinations in a SF-Set minus 1.

maxNrofPUCCH-Resources INTEGER ::= 128

maxNrofPUCCH-Resources-1 INTEGER ::= 127

maxNrofPUCCH-ResourceSets INTEGER ::= 4 — Maximum number of PUCCH Resource Sets

maxNrofPUCCH-ResourceSets-1 INTEGER ::= 3 — Maximum number of PUCCH Resource Sets minus 1.

maxNrofPUCCH-ResourcesPerSet INTEGER ::= 32 — Maximum number of PUCCH Resources per PUCCH-ResourceSet

maxNrofPUCCH-P0-PerSet INTEGER ::= 8 — Maximum number of P0-pucch present in a p0-pucch set

maxNrofPUCCH-PathlossReferenceRSs INTEGER ::= 4 — Maximum number of RSs used as pathloss reference for PUCCH power control.

maxNrofPUCCH-PathlossReferenceRSs-1 INTEGER ::= 3 — Maximum number of RSs used as pathloss reference for PUCCH power

— control minus 1.

maxNrofP0-PUSCH-AlphaSets INTEGER ::= 30 — Maximum number of P0-pusch-alpha-sets (see 38,213, clause 7.1)

maxNrofP0-PUSCH-AlphaSets-1 INTEGER ::= 29 — Maximum number of P0-pusch-alpha-sets minus 1 (see 38,213, clause 7.1)

maxNrofPUSCH-PathlossReferenceRSs INTEGER ::= 4 — Maximum number of RSs used as pathloss reference for PUSCH power control.

maxNrofPUSCH-PathlossReferenceRSs-1 INTEGER ::= 3 — Maximum number of RSs used as pathloss reference for PUSCH power

— control minus 1.

maxNrofNAICS-Entries INTEGER ::= 8 — Maximum number of supported NAICS capability set

maxBands INTEGER ::= 1024 — Maximum number of supported bands in UE capability.

maxBandsMRDC INTEGER ::= 1280

maxBandsEUTRA INTEGER ::= 256

maxCellReport INTEGER ::= 8

maxDRB INTEGER ::= 29 — Maximum number of DRBs (that can be added in DRB-ToAddModLIst).

maxFreq INTEGER ::= 8 — Max number of frequencies.

maxFreqIDC-MRDC INTEGER ::= 32 — Maximum number of candidate NR frequencies for MR-DC IDC indication

maxNrofCandidateBeams INTEGER ::= 16 — Max number of PRACH-ResourceDedicatedBFR that in BFR config.

maxNrofPCIsPerSMTC INTEGER ::= 64 — Maximun number of PCIs per SMTC.

maxNrofQFIs INTEGER ::= 64

maxNrOfSemiPersistentPUSCH-Triggers INTEGER ::= 64 — Maximum number of triggers for semi persistent reporting on PUSCH

maxNrofSR-Resources INTEGER ::= 8 — Maximum number of SR resources per BWP in a cell.

maxNrofSlotFormatsPerCombination INTEGER ::= 256

maxNrofSpatialRelationInfos INTEGER ::= 8

maxNrofIndexesToReport INTEGER ::= 32

maxNrofIndexesToReport2 INTEGER ::= 64

maxNrofSSBs-1 INTEGER ::= 63 — Maximum number of SSB resources in a resource set minus 1.

maxNrofS-NSSAI INTEGER ::= 8 — Maximum number of S-NSSAI.

maxNrofTCI-StatesPDCCH INTEGER ::= 64

maxNrofTCI-States INTEGER ::= 128 — Maximum number of TCI states.

maxNrofTCI-States-1 INTEGER ::= 127 — Maximum number of TCI states minus 1.

maxNrofUL-Allocations INTEGER ::= 16 — Maximum number of PUSCH time domain resource allocations.

maxQFI INTEGER ::= 63

maxRA-CSIRS-Resources INTEGER ::= 96

maxRA-OccasionsPerCSIRS INTEGER ::= 64 — Maximum number of RA occasions for one CSI-RS

maxRA-Occasions-1 INTEGER ::= 511 — Maximum number of RA occasions in the system

maxRA-SSB-Resources INTEGER ::= 64

maxSCSs INTEGER ::= 5

maxSecondaryCellGroups INTEGER ::= 3

maxNrofServingCellsEUTRA INTEGER ::= 32

maxMBSFN-Allocations INTEGER ::= 8

maxNrofMultiBands INTEGER ::= 8

maxCellSFTD INTEGER ::= 3 — Maximum number of cells for SFTD reporting

maxReportConfigId INTEGER ::= 64

maxNrofCodebooks INTEGER ::= 16 — Maximum number of codebooks suppoted by the UE

maxNrofCSI-RS-Resources INTEGER ::= 7 — Maximum number of codebook resources supported by the UE

maxNrofSRI-PUSCH-Mappings INTEGER ::= 16

maxNrofSRI-PUSCH-Mappings-1 INTEGER ::= 15

maxSIB INTEGER::= 32 — Maximum number of SIBs

maxSI-Message INTEGER::= 32 — Maximum number of SI messages

maxPO-perPF INTEGER ::= 4 — Maximum number of paging occasion per paging frame

maxAccessCat-1 INTEGER ::= 63 — Maximum number of Access Categories minus 1

maxBarringInfoSet INTEGER ::= 8 — Maximum number of access control parameter sets

maxCellEUTRA INTEGER ::= 8 — Maximum number of E-UTRA cells in SIB list

maxEUTRA-Carrier INTEGER ::= 8 — Maximum number of E-UTRA carriers in SIB list

maxPLMNIdentities INTEGER ::= 8 — Maximum number of PLMN identites in RAN area configurations

maxDownlinkFeatureSets INTEGER ::= 1024 — (for NR DL) Total number of FeatureSets (size of the pool)

maxUplinkFeatureSets INTEGER ::= 1024 — (for NR UL) Total number of FeatureSets (size of the pool)

maxEUTRA-DL-FeatureSets INTEGER ::= 256 — (for E-UTRA) Total number of FeatureSets (size of the pool)

maxEUTRA-UL-FeatureSets INTEGER ::= 256 — (for E-UTRA) Total number of FeatureSets (size of the pool)

maxFeatureSetsPerBand INTEGER ::= 128 — (for NR) The number of feature sets associated with one band.

maxPerCC-FeatureSets INTEGER ::= 1024 — (for NR) Total number of CC-specific FeatureSets (size of the pool)

maxFeatureSetCombinations INTEGER ::= 1024 — (for MR-DC/NR)Total number of Feature set combinations (size of the

— pool)

maxInterRAT-RSTD-Freq INTEGER ::= 3

— TAG-MULTIPLICITY-AND-TYPE-CONSTRAINT-DEFINITIONS-STOP

— ASN1STOP

– End of NR-RRC-Definitions

— ASN1START

END

— ASN1STOP