6.5 Information attribute definitions

32.6423GPPConfiguration Management (CM)Network Resource Model (NRM)Release 11Telecommunication managementTSUTRAN network resources Integration Reference Point (IRP)

6.5.1 Definition and legal values

The following table defines the attributes that are present in several Information Object Classes (IOCs) of the present document.

Attributes

Attribute Name

Definition

Legal Values

adjacentCell

It carries the DN of the UtranGenericCell or the ExternalUtranGenericCell.

aichPower

The Power of the AICHchannel in an FDD cell, "AICH Power" in Ref. 3GPP TS 25.433 [5].

See "AICH Power" in Ref. 3GPP TS 25.433 [5].

bchPower

The power of the broadcast channel in the FDD mode cell, "BCH Power" in Ref. 3GPP TS 25.433 [5].

See "DL Power" in Ref. 3GPP TS 25.433 [5].

cellCapabilityContainerFDD

Defined in 3GPP TS 25.423[28]

Each bit indicates whether a cell supports a particular functionality.

BITSTRING(32)

cellCapabilityContainerTDD

Defined in 3GPP TS 25.423[28]

Each bit indicates whether a cell supports a particular functionality.

BITSTRING(32)

cellIndividualOffset

Defined in 3GPP TS25.331 (25.423). Attribute relevant for HO decision
Used to offset measured quantity value.

See "Cell individual offset" in Ref. 3GPP TS 25.331 [9].

cellMode

An attribute that identifies the cell mode.

Type: Enumerated value

Range: ("FDD mode", "1.28McpsTDD mode", "3.84McpsTDD mode", "7.68McpsTDD mode")

cellParameterId

This attribute identifies unambiguously the TDD mode cell:

3.84 and 7.68 Mcps TDD – Code Groups, Scrambling Codes, Midambles and Toffset, or

1.28 Mcps TDD – SYNC-DL and SYNC-UL sequences, the scrambling codes and the midamble codes.

"Cell Parameter ID" in Ref. TS 25.433 [5]

See "Cell Parameter ID" in Ref. 3GPP TS 25.433 [5].

cId

The attribute is the identifier of a cell in one RNC, "C-id" in Ref. 3GPP TS 25.401 [4] and "C-ID" in Ref. 3GPP TS 25.433 [5].

See "C-ID" in Ref. 3GPP TS 25.433 [5].

closedLoopModelSupportIndicator

Power control, defined in 3GPP TS 25.423[28]

The Closed Loop Mode1 Support Indicator indicates whether the particular cell is capable to support Closed loop mode1 or not.

ENUMERATED

connMscNumber

The MSC number of the far end MSC Server connected by the Iu-CS interface for which the end point is modelled, “MSC number” in Ref. 3GPP TS 23.003 [3]

See “MSC number” in Ref. 3GPP TS 23.003 [3]

connectedRncId

The RNC-Id of the far end RNC or BSC connected by the Iur interface for which the end point is modelled, “RNC-Id” in Ref. 3GPP TS 23.003 [3]

See “RNC-Id” in Ref. 3GPP TS 23.003 [3]

connSgsnNumber

The SGSN number of the far end SGSN connected by the Iu-PS interface for which the end point is modelled, “SGSN number” in Ref. 3GPP TS 23.003 [3]

See “SGSN number” in Ref. 3GPP TS 23.003 [3]

deltaQrxlevmin

Cell (re)selection, defined in 3GPP TS25.331
If present, the actual value of Qrxlevmin = Qrxlevmin + DeltaQrxlevmin

See "DeltaQrxlevmin" in Ref. 3GPP TS 25.331 [9].

dpchConstantValue

DPCH Constant Value is the power margin in dB used by a UE to set the proper uplink power, "DPCH Constant Value" in Ref. TS 25.433 [5].

See "Constant Value" in Ref. 3GPP TS 25.433 [5].

dpcModeChangeSupportIndicator

Power control, defined in 3GPP TS 25.423 [28]

The DPC Mode Change Support Indicator IE indicates that the particular cell is capable to support DPC mode change.

ENUMERATED

dwPchPower

DwPCH Power is the power that shall be used for transmitting the DwPCH in a 1.28 Mcps TDD cell, "DwPCH Power" in Ref. 3GPP TS 25.433 [5].

See "DwPCH Power" in Ref. 3GPP TS 25.433 [5].

fachPower

The maximum power of the FACH transport channel that may be used in the cell, "Max FACH Power" in Ref 3GPP TS 25.433 [5].

See "DL Power" in Ref. 3GPP TS 25.433 [5].

fpachPower

The maximum power of the FPACH channel that shall be used in TDD cell, "FPACH Power" in Ref. 3GPP TS 25.433 [5].

See "FPACH Power" in Ref. 3GPP TS 25.433 [5].

frameOffset

Neighbouring cells monitoring, defined in 3GPP TS 25.423[28]
Frame Offset is the required offset between the dedicated channel downlink transmission frames (CFN, Connection Frame Number) and the broadcast channel frame offset (Cell Frame Number). The Frame Offset is used in the translation between Connection Frame Number (CFN) on Iub/Iur and least significant 8 bits of SFN (System Frame Number) on Uu. The Frame Offset is UE and cell specific.

INTEGER(0..255)

hcsPrio

Cell (re)selection for HCS
Defined in Ref. 3GPP TS25.331 [9].
This specifies the HCS priority level (0-7) for serving cell and neighbouring cells.
HCS priority level 0 means lowest priority and HCS priority level 7 means highest priority.

See "HCS_OFFmbms" in Ref. 3GPP TS 25.331 [9].

hsEnable

A label indicating whether or not HSDPA is enabled in the UTRAN cell. A value of 0 represents that HSDPA is not enabled and a value of 1 represents that HSDPA is enabled.

Type: Integral numeric value

Range: (0..1)

hsFlag

A label indicating whether or not HSDPA is supported in the UTRAN cell. A value of 0 indicates that HSDPA is not supported and a value of 1 indicates that HSDPA is supported.

Type: Integral numeric value

Range: (0..1)

id

An attribute whose "name+value" can be used as an RDN when naming an instance of the object class. This RDN uniquely identifies the object instance within the scope of its containing (parent) object instance.

isHOAllowed

This indicates if HO is allowed or prohibited.

If ‘yes’, handover is allowed from source cell to target cell. The source cell is identified by the name-containing UtranGenericCell or EUtranGenericCell of the UtranRelation that has the isHOAllowed. The target cell is referenced by the UtranRelation that has this isHOAllowed.

If ‘no’, handover shall not be allowed.

yes , no

isRemoveAllowed

This indicates if the subject UtranRelation can be removed (deleted) or not.

If ‘yes’, the subject UtranRelation instance can be removed (deleted).

If ‘no’, the subject UtranRelation instance shall not be removed (deleted) by any entity but an IRPManager.

yes , no

intraANRSwitch

This attribute determines whether the intra UTRAN ANR function is activated or deactivated.

If “on”, the intra UTRAN ANR function may add or remove Intra-UTRAN Neighbour Relations, i.e. add or remove UtranRelation instances from UtranGenericCells of this RncFunction.
If “off”, the intra UTRAN ANR function must not add or remove Intra-UTRAN Neighbour Relations, i.e. add or remove UtranRelation instances from UtranGenericCells of this RncFunction.

on, off

iRATANRSwitch

This attribute determines whether the IRAT ANR function is activated or deactivated.

If “on”, the IRAT ANR function may add or remove IRAT Neighbour Relations, i.e. add or remove EUtranRelation or GsmRelation instances from UtranGenericCells of this RncFunction.
If “off”, the IRAT ANR function must not add or remove IRAT Neighbour Relations, i.e. add or remove EUtranRelation or GsmRelation instances from UtranGenericCells of this RncFunction.

on, off

isChangeForEnergySavingAllowed

This attribute allows to IRPManager to prohibit or allow configuration changes of the cell for ESM purposes by the IRPAgent. This restriction also applies to instances name contained in such cells. Their attribute values cannot be changed by the IRPAgent.

yes, no

isESCoveredBy

The value of the attribute is configured by the IRPManager and is not changed by the IRPAgent. It indicates whether the adjacentCell according to this planning provides no, partial or full Inter-RAT coverage for the cell which name-contains the UtranRelation instance.

Adjacent cells with this attribute equal to “yes” are recommended to be considered as candidate cells to take over the coverage when the original cell is about to be transferred to energySaving state.

The entirety of adjacent cells with this property equal to “partial” are recommended to be considered as entirety of candidate cells to take over the coverage when the original cell is about to be transferred to energySaving state.

No, partial, yes

lac

Location Area Code, "LAC" in Ref. 3GPP TS 23.003 [3].

See "LAC" in Ref. 3GPP TS 25.413 [23].

localCellId

The Local Cell id is used to uniquely identify the set of resources defined in a Node B to support a cell. It must be unique in Node B at a minimum, but may be unique in UTRAN. . Local Cell Identifier" Ref. 3GPP TS 25.401 [4], "Local Cell ID" in 3GPP TS 25.433 [5].

See "Local Cell ID" in Ref. 3GPP TS 25.433 [5].

maximumAllowedUlTxPower

Cell (re)selection, defined in Ref. 3GPP TS25.331 [9].
This information element indicates the maximum allowed uplink transmit power.

See "Maximum allowed UL TX power" in Ref. 3GPP TS 25.331 [9].

A single integral value in dBm. Range: (-50..33).

maximumTransmissionPower

The maximum transmission power of a cell. It is the maximum power for all downlink channels added together, that is allowed to be used simultaneously in a cell, "Maximum Transmission Power" in Ref. 3GPP TS 25.433 [5].

See "Maximum Transmission Power" in Ref. 3GPP TS 25.433 [5].

mcc

Mobile Country Code, MCC (part of the PLMN Identifier) in, Ref. 3GPP TS 23.003 [3].

See "MCC" in "PLMN identity" in Ref. 3GPP TS 25.413 [23].

mnc

Mobile Network Code, MNC (part of the PLMN Identity) in Ref. 3GPP TS 23.003 [3].

See "MNC" in "PLMN identity" in Ref. 3GPP TS 25.413 [23].

numOfHspdschs

In FDD: the number of codes at the defined spreading factor (SF=16), within the complete code tree. See Ref. 3GPP TS 25.433 [5].

In TDD: the number of HS-PDSCHs in a Cell; Ref. 3GPP TS 25.433 [5].

Type: INTEGER

Range: (0..15) for FDD mode,

Range: (0..95) for TDD mode

numOfHsscchs

The number of HS-SCCHs for one cell. Ref. 3GPP TS 25.433 [5].

Type: INTEGER

Range: (1..32)

pchPower

The power of PCH transport channel in the cell, "PCH Power" in Ref 3GPP TS 25.433 [5].

See "DL Power" in Ref. 3GPP TS 25.433 [5].

penaltyTime

Cell (re)selection for HCS, defined in 3GPP TS25.331 (TS 25.304)
This specifies the time duration for which the TEMPORARY_OFFSET is applied for a neighbouring cell.

See "Penalty_time" in Ref. 3GPP TS 25.331 [9].

pichPower

The Power of the PICH channel in the cell, "PICH Power" in Ref. 3GPP TS 25.433 [5].

See "PICH Power" in Ref. 3GPP TS 25.433 [5].

primaryCcpchPower

The power of the primary CCPCH channel in the TDD cell, "PCCPCH Power" in Ref. 3GPP TS 25.433 [5].

See "PCCPCH Power" in Ref. 3GPP TS 25.433 [5].

primaryCpichPower

The power of the primary CPICH channel in the FDD mode cell, "Primary CPICH Power" in Ref. 3GPP TS 25.433 [5].

See "Primary CPICH Power" in Ref. 3GPP TS 25.433 [5].

primarySchPower

The power of the primary synchronisation channel in the FDD mode cell, "Primary SCH Power” in Ref. 3GPP TS 25.433 [5].

See "DL Power" in Ref. 3GPP TS 25.433 [5].

primaryScramblingCode

The primary DL scrambling code used by the FDD mode cell, "Primary Scrambling Code" in Ref. 3GPP TS 25.433 [5].

See "Primary Scrambling Code" in Ref. 3GPP TS 25.433 [5].

qhcs

Cell (re)selection for HCS, defined in Ref. 3GPP TS25.331 [9].
This specifies the quality threshold levels for applying prioritised hierarchical cell re-selection

See "Qhcs" in Ref. 3GPP TS 25.331 [9]

qqualMin

Cell (re)selection, defined in Ref. 3GPP TS25.331 [9].
This specifies the minimum required quality level in the cell in dB. It is only applicable for FDD cells.

See "QqualMin" in Ref. 3GPP TS 25.331 [9].

qrxlevMin

Cell (re)selection, defined in Ref. 3GPP TS25.331 [9].
This specifies the minimum required RX level in the cell in dBm.

See "QrxlevMin" in Ref. 3GPP TS 25.331 [9].

rac

Routing Area Code, "RAC” in Ref. 3GPP TS 23.003 [3].

See "RAC" in Ref. 3GPP TS 25.413 [23].

readSFNIndicator

Neighbouring cells monitoring, defined in Ref. 3GPP TS25.331 [9].

See "Read SFN indicator" in Ref. 3GPP TS 25.331 [9]

referenceTimeDifferenceToCell

Neighbouring cells monitoring, defined in Ref. 3GPP TS25.331 [9].

In the System Information message, the reference time difference to cell indicates the timing difference between the primary CCPCH of the current cell and the primary CCPCH of a neighbouring cell.

In the Measurement Control message, the reference time difference to cell indicates the timing difference between UE uplink transmission timing and the primary CCPCH of a neighbouring cell.

See "Reference time difference to cell" in Ref. 3GPP TS 25.331 [9].

A single integral value in chips.

Range: (0..38400) by steps of 40, 256 or 2560.

relatedAntennaList

This is an attribute to list the DNs of AntennaFunction(s) (see TS 32.792[24]) that support the UtranGenericCell.

See “relatedAntennaList” in Ref. 3GPP TS 32.792 [24]

relatedSectorEquipment

This is an attribute to the DN of SectorEquipment (see TS 32.792[24]) that support the UtranGenericCell.

See “relatedSectorEquipment” Ref. 3GPP TS 32.792 [24].

relatedTmaList

This is an attribute to list the DNs of TmaFunction(s) (see TS 32.792[24]) that support the UtranGenericCell.

See “relatedTmaList” Ref. 3GPP TS 32.792 [24].

restrictionStateIndicator

Cell Access Control, defined in 3GPP TS 25.423[28].

The Restriction state indicator is the identifier indicates whether the cell is "Cell Reserved for Operator Use" or not. It is provided by DRNS and reported to SRNC.

ENUMERATED

rncId

IOC ExternalUtranGenericCell and ExternalRncFunction:

Unique RNC ID for the associated RNC, "RNC Id" in Ref. 3GPP TS 23.003 [3].

IOC RncFunction:

Unique RNC ID, "RNC Id" in Ref. 3GPP TS 23.003 [3].

See "RNC-ID" in Ref. 3GPP TS 25.413 [23].

sac

Service Area Code, "SAC” in Ref. 3GPP TS 23.003 [3].

See "SAC" in Ref. 3GPP TS 25.413 [23].

schPower

The power of the synchronisation channel in 3.84 Mcps TDD cell, "SCH Power" in Ref. 3GPP TS 25.433 [5].

See "DL Power" in Ref. 3GPP TS 25.433 [5].

schTimeSlot

The SCH Time Slot IE represents the first time slot (k) of a pair of time slots inside a Radio Frame that is assigned to the Physical Channel SCH, "SCH Time Slot" in Ref. 3GPP TS 25.433 [5].

See "SCH Time Slot" in Ref. 3GPP TS 25.433 [5].

sctdIndicator

This attribute indicates whether SCTD is used, "SCDT Indicator" in Ref. 3GPP TS 25.433 [5].

See "SCDT Indicator" in Ref. 3GPP TS 25.433 [5].

secondarySchPower

The power of the secondary synchronisation channel in the FDD mode cell, "Secondary SCH Power in Ref. 3GPP TS 25.433 [5].

See "DL Power" in Ref. 3GPP TS 25.433 [5].

sharNetTceMappingInfoList

This attribute includes a list of elements. Each element is a list of shared PLMN Id (called "PLMN Target"), TCE ID and the corresponding TCE IP address.

When several PLMNs are supported and Logged MDT is requested, this attribute is used to translate From the TCE IP Address to TCE ID when a Logged MDT is ordered to the UE and to translate the TCE ID to TCE IP address when the UE has sent the log to the network.

See "PLMN Target", "Trace Collection Entity Address" and "Trace Collection Entity Id" in 3GPP TS 32.422 [25].

siptoSupported

This attribute indicates whether the RNC supports SIPTO function. A value of 0 represents that SIPTO is not supported and a value of 1 represents that SIPTO is supported (by the RNC).

Type: Integral numeric value

Range: (0..1)

snaInformation

Shared Networks Access Control, defined in 3GPP TS 25.423[28].

This information element contains a list of Shared Network Areas, identified by the Shared Network Area Code (SNAC) which a certain cell belongs to.

sttdSupportIndicator

Power control, defined in 3GPP TS 25.423[28].

The STTD Support Indicator indicates whether the STTD can be applied to DL DPCH and F-DPCH in the cell or not.

ENUMERATED

syncCase

The SCH and PCCPCH in a TDD cell are mapped on one or two downlink slots per frame. There are two cases of Sync Case as follows:

SCH and PCCPCH allocated in a single TS#k

SCH allocated in two TS: TS#k and TS#k+8. PCCPCH allocated in TS#k

"Synch Case" in Ref. 3GPP TS 25.433 [5].

See "Sync Case" in Ref. 3GPP TS 25.433 [5].

tceIDMappingInfoList

This attribute includes a list of TCE ID and the corresponding TCE IP address. It is used in Logged MDT case to provide the information to the RNC to get the corresponding TCE IP address when there is an MDT log received from the UE. This attribute is used if only one PLMN is supported.

See “Trace Collection Entity Address” and “Trace Collection Entity Id” in 3GPP TS 32.422 [25].

temporaryOffset1

Cell (re)selection for HCS, defined in 3GPP TS25.331 (TS 25.304)
This specifies the offset applied to the H and R criteria for a neighbouring cell for the duration of PENALTY_TIME. It is used for TDD and GSM cells and for FDD cells in case the quality measure for cell selection and re-selection is set to CPICH RSCP

See "Temporary_offset1" in Ref. 3GPP TS 25.331 [9].

temporaryOffset2

Cell (re)selection for HCS, defined in 3GPP TS25.331 (TS 25.304)
This specifies the offset applied to the H and R criteria for a neighbouring cell for the duration of PENALTY_TIME. It is used for FDD cells in case the quality measure for cell selection and re-selection is set to CPICH Ec/No.

See "Temporary_offset2" in Ref. 3GPP TS 25.331 [9.]

timeSlotForSch

The Time Slot represents the time interval assigned to a Physical Channel referred to the start of a Radio Frame, "SCH Time Slot" in Ref. 3GPP TS 25.433 [5].

See "SCH Time Slot" in Ref. 3GPP TS 25.433 [5].

timeSlotListHcr

This attribute defines the time slot configuration information in the TDD cell. It is a list which contains 15 (for 3.84 or 7.68 Mcps TDD cell) items. Within each item there are three parts: timeSlotId, timeSlotDirection and timeSlotStatus. (Ref. 3GPP TS 25.433 [5]).

timeSlotId:

Type: Integral numeric value

Range: (0..14);

timeSlotDirection:

Type: Enumerated value

Range: (Ul, Dl);

timeSlotStatus:

Type: Enumerated value

Range: (Active, Not active)

timeSlotListLcr

This attribute defines the time slot configuration information in the TDD cell. It is a list which contains 7 (for 1.28 Mcps TDD cell) items. Within each item there are three parts: timeSlotId, timeSlotDirection, timeSlotStatus, corresponding to Time Slot LCR, Time Slot Direction, Time Slot Status (Ref. 3GPP TS 25.433 [5]).

If multiple frequencies exist within the cell, the timeSlotList indicates the Time Slot configuration of Primary Frequency.

timeSlotId:

Type: Integral numeric value

Range: (0..6);

timeSlotDirection:

Type: Enumerated value

Range: (Ul, Dl);

timeSlotStatus:

Type: Enumerated value

Range: (Active, Not active)

tmaFunctionList

This is a referential attribute to list the DNs of TmaFunction(s) that support the UtranGenericCell.

A list of DNs as defined in TS 32.300 [13].

tstdIndicator

This attribute indicates whether TSTD is used, TSDT Indicator" in Ref. 3GPP TS 25.433 [5].

See "TSDT Indicator" in Ref. 3GPP TS 25.433 [5].

txDiversityIndicator

Defined in 3GPP TS25.331 (25.423)
This attribute indicates whether following conditions are satisfied:

Primary CPICH is broadcast from two antennas

STTD is applied to Primary CCPCH

TSTD is applied to Primary SCH and Secondary SCH

See "TX Diversity Indicator" in Ref. 3GPP TS 25.331 [9]

uarfcn

The UTRA absolute Radio Frequency Channel number for TDD mode cell, UARFCN (Ref. 3GPP TS 25.433 [5]). For 1.28Mcps TDD, if multiple frequencies exist within the cell, the uarfcn indicates the frequency of Primary Frequency.

Type : Integral numeric Value

Range: (0..16383)

uarfcnDl

The DL UTRA absolute Radio Frequency Channel number for FDD mode cell, "UARFCN” in Ref. 3GPP TS 25.433 [5].

See "UARFCN" in Ref. 3GPP TS 25.433 [5].

uarfcnLCRList

For 1.28 Mcps TDD, if multiple frequencies exist within the cell, this is a list of the UARFCN and Time Slot configuration information of the Secondary Frequencies. Specifically, within each item in the list there are two main parts: uarfcn and timeSlotListLcr. The second part is a list of elements which have the sub-elements: timeSlotId, timeSlotDirection and timeSlotStatus. These attributes correspond to “UARFCN, Time Slot LCR, Time Slot Direction and Time Slot Status” (Ref. 3GPP TS 25.433 [5]).

For “uarfcn, timeSlotId, timeSlotDirection, timeSlotStatus”, see “UARFCN, Time Slot LCR, Time Slot Direction, Time Slot Status” in Ref. 3GPP TS 25.433 [5].

For maximum number of the Secondary Frequencies per cell, see " maxFrequencyinCell-1" in Ref. 3GPP TS 25.433 [5].

uarfcnUl

The UL UTRA absolute Radio Frequency Channel number for FDD mode cell, "UARFCN” in Ref. 3GPP TS 25.433 [5].

See "UARFCN" in Ref. 3GPP TS 25.433 [5].

uraList

A list of UTRAN Registration Area identities, which an UtranCell can belong to, "URA identity" in Ref. 3GPP TS 25.331 [9].

For URA, see "URA identity" in Ref. 3GPP TS 25.331[9], subclause 10.3.2.6.

For maximum number of URAs per cell, see "maxURA" in Ref. 3GPP TS 25.331 [9], subclause 10.3.10.

6.5.2 Constraints

None.