7.4.4 Desktop and vehicle-mounted hands-free UE receiving

26.1313GPPRelease 17RequirementsTerminal acoustic characteristics for telephonyTS

The receiving sensitivity frequency response from the SS audio input (analogue or digital input of the reference speech encoder of the SS) to the free-field shall be as follows:

The receiving sensitivity frequency response shall be within the mask which can be drawn with straight lines between the breaking points in tableĀ 25 on a logarithmic (frequency) – linear (dB sensitivity) scale.

Table 25: Desktop and vehicle-mounted hands-free receiving sensitivity/frequency mask

Frequency (Hz)

Upper limit (dB)

Lower limit (dB)

TBD

TBD

TBD

NOTE: The limits for intermediate frequencies lie on a straight line drawn between the given values on a linear (dB) – logarithmic (Hz) scale.

All sensitivity values are expressed in dB on an arbitrary scale.

It is recommended as a performance objective that the receiving sensitivity frequency response be within the mask which can be drawn with straight lines between the breaking points in tableĀ 26 on a logarithmic (frequency) – linear (dB sensitivity) scale.

Table 26: Performance objective for desktop and vehicle-mounted hands-free receiving sensitivity/frequency response

Frequency (Hz)

Upper limit (dB)

Lower limit (dB)

TBD

TBD

TBD

TBD

Figure 19: Desktop and vehicle-mounted hands-free receiving sensitivity/frequency masks

Compliance shall be checked by the relevant test described in TS 26.132.