7.4.5 Hand-held hands-free UE sending

26.1313GPPRelease 17RequirementsTerminal acoustic characteristics for telephonyTS

The sending sensitivity frequency response from the MRP to the SS audio output (digital output of the reference speech decoder of the SS) shall be as follows:

The sending sensitivity frequency response shall be within the mask which can be drawn with straight lines between the breaking points in table 27 on a logarithmic (frequency) – linear (dB sensitivity) scale.

Table 27: Hand-held hands-free sending sensitivity/frequency mask

Frequency (Hz)

Upper limit (dB)

Lower limit (dB)

100

[3…5]

200

[3…5]

[-3…-5]

5000

[3…5]

[-3…-5]

12500

[3…5]

[-5…-7]

16000

[3…5]

NOTE 1: All sensitivity values are expressed in dB on an arbitrary scale.

NOTE 2: Values within [] are provisional and expected to be defined as single values based on future studies.

It is recommended as a performance objective that the sending sensitivity/frequency response be within the mask which can be drawn with straight lines between the breaking points in tableĀ 28.

Table 28: Hand-held hands-free sending sensitivity/frequency performance objective mask

Frequency (Hz)

Upper limit (dB)

Lower limit (dB)

100

[3]

200

[3]

[-3]

5000

[3]

[-3]

12500

[3]

[-5]

16000

[3]

NOTE 1: All sensitivity values are expressed in dB on an arbitrary scale.

NOTE 2: Values within [] are provisional and expected to be confirmed, revised, or removed, based on future studies.

TBD

Figure 20: Hand-held hands-free sending sensitivity/frequency masks

Compliance shall be checked by the relevant test described in TS 26.132.