Skip to content
iTecTec
  • Tools
    • ARFCN-Frequency Converter
  • Contact Us
  • Foreword
  • 1 Scope
  • 2 Frequency bands and channel arrangement
  • 3 Reference configuration
  • 4 Transmitter characteristics
  • 5 Receiver characteristics
  • 6 Transmitter/receiver performance
    • 6 Transmitter/receiver performance
    • 6.1 Nominal Error Rates (NER)
    • 6.2 Reference sensitivity level
    • 6.3 Reference interference level
    • 6.4 Erroneous frame indication performance
    • 6.5 Random access and paging performance at high input levels
    • 6.6 Frequency hopping performance under interference conditions
    • 6.7 Incremental Redundancy Performance for EGPRS MS
      • 6.7 Incremental Redundancy Performance for EGPRS MS
  • C.1 Simple wideband propagation model
  • C.2 Doppler spectrum types
  • C.3 Propagation models
  • D.1 General
  • D.2 Environmental requirements for the MSs
  • D.3 Environmental requirements for the BSS equipment
  • E.1 Introduction
  • E.2 Spurious emissions
  • E.3 Intermodulation products
  • E.4 Out of band gain
  • E.5 Frequency error and modulation accuracy
  • F.1 Introduction
  • F.2 Transmitting path
  • F.3 Receiving path
  • F.4 Guidelines (informative)
  • H.1 TOA LMU Requirements
  • H.2 E-OTD LMU Requirements
  • I.1 Introduction
  • I.2 Sensitivity and Interference Performance

D.1 General

05.053GPPRadio transmission and receptionTS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

This normative annex specifies the environmental requirements for MS and BSS equipment, Within these limits the requirements of the GSM specifications shall be fulfilled.