D.4 Non-functional Requirements

31.1133GPPRelease 8TSUniversal Subscriber Identity Module Application Toolkit (USAT) interpreter byte codes

D.4.1 Customisation Requirements

  1. All customisation requirements with regard to PINs and PUKs listed in E.3.1 apply equally here.
  2. It shall be possible to enable or disable the "Authorisation request" and the subsequent user confirmation by performing an administrative task at personalisation time.
  3. The authorisation prompt shall be configurable through an administrative task at personalisation time. UCS2 and GSM default alphabets shall be supported.
  4. It should be possible to configure the number of digits displayed in the authorisation value through an administrative task at personalisation time. The number of digits displayed shall be 4, 8, 12 or 16, with 16 as the default.
  5. The list of URL(s) linked to a private key shall be updatable through an administrative task at personalisation time.
  6. The list of trusted key hashes linked to a private key shall be updatable through an administrative task at personalisation time.

D.4.2 Architectural Requirements

  1. All architectural requirements with regard to PINs and PUKs listed in E.3.2 apply equally here.

Annex E (normative):
PIN Management Plug-ins Implementation Specification

This annex provides a detailed description of the PIN management plug-ins defined in subclause 9.1.4.