K.4 Call control information elements.

04.083GPPMobile radio interface Layer 3 specificationRelease 1998TS

For the call control information elements listed below, the default coding of the information element identifiers is defined in table K.4/3GPP TS 04.08.

Table K.4/3GPP TS 04.08: Default information element identifier coding
for call control information elements

+————————————————-+

│ │Reference │

│ │ sub-clause │

│ │ │

+————————————–+———-│

8 7 6 5 4 3 2 1 │ │

│1 : : : – – – – Type 1 info elements │ │

│ 0 0 1 – – – – shift │10.5.4.2 │

│ │ and .3 │

│ 0 1 1 – – – – Note │ │

│ 1 0 1 – – – – Repeat indicator │10.5.4.22 │

│ │ │

│1 0 1 0 : : : : Type 2 information │ │

│ elements │ │

│ 0 0 0 0 More data │10.5.4.19 │

│ 0 0 0 1 CLIR Suppression │10.5.4.11a│

│ 0 0 1 0 CLIR Invocation │10.5.4.11b│

│ 0 0 1 1 Reverse call setup │10.5.4.22a│

│ direction │ │

│ │ │

│0 : : : : : : : Type 3 & 4 info │ │

│ elements │ │

│ 0 0 0 0 1 0 0 Bearer capability │10.5.4.5 │

│ 0 0 0 1 0 0 0 Cause │10.5.4.11 │

│ 0 0 1 0 1 0 0 Note │ │

│ 0 0 1 0 1 0 1 Call Control │10.5.4.5a │

│ Capabilities │ │

│ 0 0 1 1 1 0 0 Facility │10.5.4.15 │

│ 0 0 1 1 1 1 0 Progress indicator │10.5.4.21 │

│ 0 1 0 0 1 0 0 Auxiliary states │10.5.4.4 │

│ 0 1 0 0 1 1 1 Note │ │

│ 0 1 0 1 1 0 0 Keypad facility │10.5.4.17 │

│ 0 1 1 0 1 0 0 Signal │10.5.4.23 │

│ 1 0 0 1 1 0 0 Connected number │10.5.4.13 │

│ 1 0 0 1 1 0 1 Connected subaddress │10.5.4.14 │

│ 1 0 1 1 1 0 0 Calling party BCD │ │

│ number │10.5.4.9 │

│ 1 0 1 1 1 0 1 Calling party subad │10.5.4.10 │

│ 1 0 1 1 1 1 0 Called party BCD │ │

│ number │10.5.4.7 │

│ 1 1 0 1 1 0 1 Called party subad │10.5.4.8 │

│ 1 1 1 0 1 0 0 Redirecting Party BCD│10.5.4.21a│

│ 1 1 1 1 1 0 1 Redirecting Party │ │

│ subaddress │10.5.4.21b│

│ 1 1 1 1 1 0 0 Low layer compatib. │10.5.4.18 │

│ 1 1 1 1 1 0 1 High layer compatib. │10.5.4.16 │

│ 1 1 1 1 1 1 0 User-user │10.5.4.25 │

│ 1 1 1 1 1 1 1 SS version indicator │10.5.4.24 │

+————————————————-+

NOTE: These values were allocated but never used in earlier phases of the protocol.

Annex L (informative):
Allocation of responsibilities between STCs

This annex is provided for co-ordination purposes between the separate sub-technical committees (STCs) which meet under the auspices of SMG.

NOTE: The responsible STCs have agreed that sub-clauses within the present document should not be renumbered because of cross impacts in other specifications. The listing of messages and information elements with 3GPP TS 04.08 is by alphabetic order. To maintain this means that innovative numbering schemes have been used for the items in a sub-clause.

Table L/3GPP TS 04.08: STC responsibility allocation

Sub-clauses STC Responsible

0, 1 SMG3/SMG2

2 SMG2

3 SMG2 RR

4 SMG3 MM (second responsibility to SMG2)

5 SMG3 CC

6 (Non existent)

7 SMG3

8 SMG3 (most probably SA)

9, head part SMG3

9.1 SMG2 RR

9.2 SMG3 MM

9.3 SMG3 CC

10, head part up to 10.5 head part SMG3

10.5.1 SMG3 secondary SMG2

10.5.2 SMG2 RR

10.5.3 SMG3 MM

10.5.4 SMG3 CC

11.1 SMG2 RR

11.2 SMG3 MM

11.3 SMG3 CC

Annex A, B, C, D, E SMG3 CC

Annex F SMG2 RR

Annex G SMG3 MM

Annex H SMG3 CC

Annex J SMG2 RR

Annex K.1 SMG2 RR

Annex K 2 SMG3 MM

Annex K 3 SMG3 CC

Annex M (normative):
Additional Requirements for backward compatibility with PCS 1900 for NA revision 0 ME

This annex is normative and provides additional requirements to support network mechanisms for backward compatibility with PCS 1900 for NA revision 0 mobile equipments (applicable until July 1, 1998).

PCS 1900 for NA revision 0 mobile equipments are defined to understand Mobile Network Codes made of up to 2 digits. However federal regulation mandates that a 3-digit MNC shall be allocated by each administration to network operators. Therefore each network operator is identified by a 3-digit Mobile Country Code and a 3-digit Mobile Network Code. An operator whose network code complies to the allocation principle specified for PCS 1900 for NA and wants to achieve for a transition period of time the backward compatibility with PCS 1900 for NA revision 0 mobile equipments shall apply the following:

– The network shall send over the air interface the 3-digit Mobile Country Code and only the two most significant digits of the Mobile Network Code (the value of the "digit" sent instead of the 3rd digit is specified in 3GPP TS 04.08, sub-clause 10.5.1.3) (see note).

When a PCS 1900 for NA (revision greater than 0) mobile equipment recognizes over the air the Mobile Country Code and the two most significant digits of the Mobile Network Code as being the HPLMN codes of the current IMSI, the mobile equipment shall take into account the value of the sixth IMSI digit read from the SIM. If this value matches to a value contained in the limited set of values for the least significant MNC digit assigned by the number administration bodies for PCS 1900 for NA then the following applies for the mobile equipment:

– The value sent over the air instead of the 3rd MNC digit in the Location Area Identification (for coding see 3GPP TS 04.08, sub-clause 10.5.1.3) shall be interpreted as the value of the sixth IMSI digit read from the SIM.

NOTE: It is still a network operator option to apply this requirement after July 1, 1998. However, in this case the following shall be considered:

1. Network selection considerations for overlapping networks:

Networks overlapping to the HPLMN, identified over the radio interface by an identical combination MCC1 MCC2 MCC3 MNC1 MNC2 (possible after July 1, 1998) may be selectable by PCS 1900 for NA mobile equipments revision 0 with the same priority as the HPLMN or presented to the user as the HPLMN

2. Roaming considerations:

Roamers (SIM) from networks identified by an identical combination MCC1 MCC2 MCC3 MNC1 MNC2 (possible after July 1, 1998) when roaming into the operator network with PCS 1900 for NA mobile equipments revision 0, may cause these equipments to exhibit an unpredictable behaviour (e.g. looping in the HPLMN selection and registration procedures).

Home subscribers (SIM) roaming with PCS 1900 for NA mobile equipments revision 0 into networks identified by an identical combination MCC1 MCC2 MCC3 MNC1 MNC2 (possible after July 1, 1998), may consider being attached to the HPLMN.

Annex N (informative):
Change Record

Creation of v 7.0.1

Based on v6.3.0 including CRs A384, A396r2, A412, A457r1, A427r2, A495, A493

Creation of v 7.1.0

A358 8 Addition of SoLSA functionality

A414 1 Addition of new functionality in the packet access procedure in order to

A419 5 Transfer of the LSA Information to the MS

A460 Cell Channel Description IE incorrectly repeated in the PDCH ASSI

A464 Channel description IE

A466 Radio link failure in dedicated mode

A468 RR-Network command cell change order procedure

A484 Clarification on the RR initialisation request

A486 Correction of message type of PDCH ASSIGNMENT COMMAND

A488 Removal of REL_OR_ABS_FN field for Starting Time encoding by a

A490 P-TMSI is introduced in the Paging request messages and in the Mobile

A494 The Pb parameter is needed in SI13/PSI13 (R98)

A496 Removal of SI15

A498 Increase of SMS_VALUE and SM_VALUE

A502 2 Correction for L2 Pseudo length SI5 & SI6 rest octets

A504 1 Addition of signalling for SoLSA enhancements

A506 Read of system information after CELL CHANGE ORDER message

A534 Correction of VGCS target mode indication IE

A540 P-TMSI is introduced in the Paging request messages and in the Mobile

A542 Clarification of Packet Page Indication

A546 2 Inclusion of SoLSA capability indication in Classmark Ies

A546 2 Inclusion of SoLSA capability indication in Classmark IEs

A548 Wrong application of approved CR on NOTIFICATION/NCH

A552 1 Correction of BTS power output

A558 2 Introduction of LCS in 3GPP TS 04.08

A578 AMR IEI

A584 3 MS radio access capability IE

A584 3 MS Radio Access Capability IE

A591 Inconsistency in definition of comprehension required

A594 Role of T3132 and T3190 timers during a TBF release procedure

A598 Alignment 04.60 on 04.08 about single block allocation for a two phase

A600 Clarification on supervision of BCCH_CHANGE_MARK in dedicated

A602 Introduction of P-TMSI in Paging request messages in the MS

A604 Correction of T3142 timeout value

A606 RR Packet Uplink Assignment align with 04.60

A701 1 GPRS Internet Hosted Octet Stream Service (IHOSS).

A751 3 Usage of the combined routing area update procedure

A753 2 Multiple ATTACH REQUEST attempts and GMM-common procedures

A755 2 Network Initiated Detach with ReAttach

A757 2 P-TMSI is introduced in the Paging request messages and in the Mobile

A759 1 Improving the user data loss less inter SGSN RA update

A761 ‘GPRS services not allowed’ cause in the ATTACH REJECT (combined

A763 1 Clarification to CCBS T334 timer

A765 1 SM-STATUS msg. Response to unknown msg type

A767 2 Cleaning up on text in general, and especially on attempt counters, PDP

A769 4 Correction to the handling of subscribed QoS values

A771 2 Correction of the handling of the Ciphering Key Sequence Number (CKSN)

A773 3 Correction of the SM message collision with equal TI to an active PDP

A775 2 Ready Timer handling in suspend state

A777 Deactivation of READY timer

A779 1 Description of cause codes in network initiated detach

A781 1 Clarification of release procedure upon PDP context deactivation

A783 2 New DEREGISTERED ‘suspended’ state

A785 1 Inconsistency in definition of comprehension required IEs

A787 1 Completion of error handling for session management

A789 2 Subsequent GMM substate and attach attempt counter

A791 Usage of GMM cause codes

A793 4 Old P-TMSI/TLLI handling

A797 2 Gs interface failure

A799 1 ‘GPRS services and non-GPRS services not allowed’: the behaviour of the

A801 1 Maximum length of Access point name and Protocol configuration

A803 1 Clash between READY time deactivation and Force to Standby Procedure

A805 GMM Mobile station identity

A807 3 Initial synchronisation after READY timer negotiation

A809 2 Usage of GMM update status U2

A811 Conditional IE GPRS CKSN in Authentication and ciphering procedure

A813 Correction of the SM message collision cases through PDP address

A815 4 Paging with IMSI

A817 2 Reactivation of PDP contexts

A819 Correcting mistakes introduced via CR’s 385, 415, 425,441 in v6.3.0

A821 1 Editorials, and correcting the A&C REQUEST plus INFORMATION

A823 MS reachable timer

A825 Correction of PDP type

A827 Conditional IE Errors

A829 4 Change of network operation mode

A831 Abnormal case in the MS when changing cell while trying to attach

A833 Definition of the PDP address IE

A835 Deactivation of PDP contexts in case of GPRS detach

A837 Improved SM messages error handling for non-semantically mandatory IE

A839 Usage of cause code #10 implicitly detached

A841 1 TMSI requested by the MSC trough the Gs interface

A371 2 BCIE modifications due to EDGE

Creation of v 7.1.1 Editorial correction to remove unnecessary double ‘Spare Half Octets’ from sub-clause 9.4.9.

Version 7.1.2 Editorial corrections of Table 10.5.144/GSM04.08 the bit-string " Receive N-PDU Number value "

Creation of v 7.2.0

A620 Correction of Mobile Station Classmark 2 in the Talker Indication message

A622 1 Clarification of MCC and MNC in SI 4/16/17 rest octets

A626 1 Alignment on 04.60 of information elements RR Packet Uplink and Downlink Assignment

A632 Length of BA List Pref IE in the Channel Release message

A636 Clarification of DRX

A640 1 Alignment of RLC_OCTET_COUNT in 04.08 with 04.60

A644 System information type 14 and 15

A648 1 Introduction of short LSA ID.

A652 1 New coding of SI 4/7/8 Rest Octets.

A658 Correction to handling of GPRS suspension cause

A662 2 Alignment between 04.08 and 04.60 on the packet access procedure attempt following T3142 or T3172 attempt

A664 Addition of 3rd MNC digit in Routing Area Identification and correction of LAI

A666 Addition of new SI type in SI 9 Rest Octets.

A670 1 Addition of PR mode in ASSIGNMENT message in 04.08

A843 Addition of 3rd MNC digit in Routing Area Identification and correction of LAI

A847 GMM attempt counters

A851 Cell Change during GPRS Detach procedure

A855 RA change in GMM-ROUTING-AREA-UPDATE-INITIATED

A937 Non power down caused Detach during Attach/ was approve as A859-collision with other CR

A860r1 CM request and combined GMM procedures

A863 "Receive N‑PDU Number list" IE padding bits

A867r1 TMSI status indication

A875 PDP context deactivation caused by LLC failure

A887 RAU Complete not returned for TMSI deallocation. Some alignments and editorials

A894 Clarification of the Detach Type "re-attach required" or "re-attach not required" in the network initiated Detach procedure

A901r1 CR clash in sec. 4.7.3.2.6

A905 CR clash in sec. 4.7.3.2.3.2 and 4.7.5.2.3.2

A909r1 T3212 restart after RAU reject

A913 New State GMM-REGISTERED.IMSI-DETACH-INITIATED

A917 Deactivate AA PDP context request message

A921r2 Coding Scheme in Network Name IE

A933 T3212 restart after GPRS detach

A897r1 Addition of Access Point Name in Request PDP Context Activation message

Creation of version 7.3.0

A684 Editorial (misleading reference)

A694 Correction to Packet Access Reject procedure

Creation of version 7.4.0

A939 1 Addition of APN to REQUEST PDP CONTEXT ACTIVATION REJECT message

A676 4 Add enhancements to LCS in 3GPP TS 04.08

Creation of version 7.5.1

A version of 7.5.0 have been available in draft format, with severere corruption of tables. This version 7.5.1 replaces that version.

A612 Immediate assignment

A674 PR_MODE field in assignment message

A676 Intorduction of LCS into 3GPP TS 04.08

A688 Channel Request Description IE length and Packet

A706 Clarification of starting timer T3134

A714 Suspension Cause IE

A641r1 Earlier implementation corrected.

Creation of version 7.6.0: Approval at TSGN#7, (changes based on v.7.4.0)

A955 Removal of APN from REQUEST PDP CONTEXT ACTIVATION REJECT message

A951r1 Clarification of NITZ time stamp coding

A959r1 Corrections to SN-PDU IE length in GMM messages

A963r1 Interpretation of CM service reject in MS supporting GPRS services

A975r1 Clarification to the MS handling when receiving detach type ‘IMSI detach’

A987 Explanation of octets in MS Classmark 1 IE

A1005 Addition of cause value # 25 ‘Pre-emption’

A1007 GPRS detach type corrections

A1013 Moving NOTIFICATION RESPONSE from MM to GSM RR

Creation of version 7.7.0: Approval at SMG#31bis

A722 The break indicator in SI 4 Rest Octets is currently coded as ‘0 | 1’. In order to support the combination of new mobile stations and old networks, the break indicator has to be coded as ‘L | H’.

A720 Moving NOTIFICATION RESPONSE from MM to GSM RR

Creation of version 7.8.0: Approval at SMG#32 and TSGN#8

A726 1 Maximum size of fixed ALLOCATION_BITMAP

A1015 Alignment on ISDN BC Coding

A1027 1 Clarification on local and forign TLLI management

Editorial correction in 10.5.2.16 The IA Rest Octets information element is a type 5 information element with 1-12 octets length, by removing a curly bracket "}" before "{ 0 | 1 < ALPHA : bit (4) >}"

Creation of version 7.9.0: Approval at GP01/ and TSGN#9

A738 Handling of Power-Control-Parameter alpha

A732 1 Extended measurement report (MAFA)

A1043 Missing P-TMSI reallocation after Attach or RAU/ CAT A/ NP-000439/ N1-000935

A995 1 Usage of cause code IE in network initiated detach/ CAT A/ NP-000439/ N1-000933

A1039 Deletion of references to OSP:IHOSS for R98/NP-000438/ N1-000928

A1047 r1 Optional support of GEA/2 Encryption Algorithm in the MS/ NP-000437/ N1001029

Creation of version 7.9.1 systematic search for "TS" and replace it with "3GPP TS" as gone wrong as much more than the TSs for Technical pecifications have been changed also

Creation of version 7.10.0 (7.a.0): Approval at TSGN#10

A1053 Correction of update status on Authentication Reject. NP-000670/ N1-001231/ Cat A/ WI=GPRS

Creation of version 7.11.0 (7.b.0): Approval at TSGN#11 on March 2001 of NP-010125 and NP-010147

A1079: Using RAU procedure for MS RAC IE update / N1-010135

A1083r2: Roaming restrictions for GPRS service / N1-010292

A1090: Alignment of MS identity IE length in ATTACH ACCEPT and RAU ACCEPT messages / N1-010355

Implemented in the same version: CR approved at GERAN #4, April 2001:

A752: MEASUREMENT_STARTING_TIME field in RR Packet Downlink Assignment IE

Meeting

Tdoc

CR

Rev

Subject

New Version

GP-05

GP-010985

A742

2

Correction in RR Sub-layer due to Uplink Removal of Pre-emption

7.12.0

NP-12

NP-010275

A1071

1

Length of User-user IE

7.13.0

NP-12

NP-010355

A1095

Missing SM cause 40 in table 10.6.6

7.13.0

NP-12

NP-010272

A1097

2

Modification to MS’s MM states to enable LCS signalling on RR layer

7.13.0

NP-12

NP-010355

A10101

2

Clarification of Network Initiated GPRS Detach Procedure

7.13.0

GP-06

GP-011895

A762

Removal of IEI explicit value in the BA List Pref information element description (R98)

7.14.0

GP-06

GP-011922

A764

Clarification of "inconsistent" MultiRate configuration IE (R98)

7.14.0

GP-07

GP-012679

A774

Restoration of the SI 3 Rest Octets IE description

7.15.0

GP-07

GP-012717

A766

1

Alignment of ASSIGNMENT CMD, HO CMD and CH MOD MOD for AMR

7.15.0

NP-14

NP-010647

A1119

Handling of new/old TLLI in the network

7.16.0

GP-08

GP-020495

A778

1

Correction of CSN.1 coding for SI 6 Rest Octets

7.17.0

NP-17

NP-020370

A1123

Support of GTT (CTM)

7.18.0

NP-18

NP-020546

A1127

No MT calls after resumption of GPRS in Network Operation Mode I

7.19.0

NP-18

NP-020550

A1133

Coding of the "Multiband Supported" bit field in the CM3 IE

7.19.0

NP-18

NP-020547

A1137

Clarification on Revision level

7.19.0

GP-15

GP-031151

A804

Correction of erroneous mathematical expressions

7.20.0

September 2003

Correction of editorial mistake in frequency band names

7.20.1

NP-22

NP-030474

A1143

Correction of MS network capability IE

7.21.0