# Excel conditional formatting per row

conditional formattingmicrosoft excel

Why Excel Conditional Formatting does not work the same as formula? I have a couple thousand rows in a file. Column A has AAA value, column B has BBB value.

       Column A   Column B
row1   1000        10
row2   2000        20
row3   3000        30


If I want to write a formula A1*B1 it will give a result 10000. When I drag it, it will automatically change source cells so it would give me A2*B2 = 40000.

So why conditional formatting doesn't do exactly the same when you copy formatting to different cell/row?

What I want to do is to set conditional formatting for each row separately:

x1.row1 > x2.row1 – make it green.

for second row: IF(x1.row2 > x2.row2) – make it green,

for third row it should be: IF(x1.row3 > x2.row3) make it green, and so on,

But Excel for every next row, compares always to first cell i.e. x1.row1 > x2.row2, x1.row1 > x2.row3 and so on.

Is there a way to apply formatting for each row separately, without creating multiple conditions?

From my understanding, you want to do a conditional formating of every cell in column x1 if it's value is higher than it's corresponding cell in column x2. To do it :

First, setup your conditional formating on the first cell

1. Click on your first cell
2. Go in Conditional formating -> New rule
3. In the Conditional Formatting Rules Manager, click New Rule...
4. Click Use a formula to determine which cells to format
5. Enter the condition for the formatting under Format values where this formula is true :
• You can enter any formula you want
• Just keep in mind that if the result of the formula is true, the conditional formatting will be applied and if not it will not be applied
• In your formula, use or remove all the dollar signs $ you want so that the formula would usually update when the cell is copied if you were copying cells in Excel. • See this article absolute vs relative cell reference in Excel • If you are not sure if your formula returns TRUE or FALSE or if the result is always as you want it, you can try it in column x3 to see if it works. • So, in your example, your conditional formatting formula would be =$A1>$B1 or =A1>B1. It is important that there is not $ in front of the 1.
6. Then set all the format you want in your conditional formatting using the Format button.
7. Accept your conditional formatting (Ok button) and go back to the Conditional formatting rules manager window. You will see your new rule.

Apply your rule to the area you want

There are 2 ways to do it :

1. In the Conditional formatting rules manager window, under the Applies to column, change the range you want your conditional formatting to be applied to the whole range you want.

• If your conditional formatting formula was well done, it will apply and update to the whole range even if the interface does not give you any clue about it.
2. Directly in the worksheet (Closing the Conditional formatting rules manager), copy the format of your first cell to all the rows you want. There are many ways to do so...

• Using the Format Painter
• Copying you first cell by dragging it and then clicking the contextual menu ->Fill formatting Only