Networking – Error while connecting VPN using Cisco VPN Client

cisco-vpn-clientnetworking

Here is the log

Cisco Systems VPN Client Version 5.0.07.0410 Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 6.2.9200  Config file directory: C:\Program Files\Cisco Systems\VPN Client\


 1. 09:53:33.418  12/09/15  Sev=Warning/3   CVPND/0xE340000C The Client
    was unable to enable the Virtual Adapter because it could not open
    the device.

 2. 09:53:33.433  12/09/15  Sev=Warning/3   CVPND/0xE340000C The Client
    was unable to enable the Virtual Adapter because it could not open
    the device.

 3. 09:53:33.433  12/09/15  Sev=Warning/2   IKE/0xE300009B Failed to
    active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

 4. 09:53:33.433  12/09/15  Sev=Warning/2   IKE/0xE30000A7 Unexpected SW
    error occurred while processing Quick Mode
    negotiator:(Navigator:2263)

Any help would be much appreciated.

Best Answer

  • Open Registry Editor i.e. regedit
  • Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva
  • Double Click on DisplayName
  • Remove characters like @oem14.inf,%VPNVA64_Desc% prefixed to DisplayName

enter image description here

  • Try connecting again