Ubuntu – Clone internal HDD to new SSD

11.04bootconfigurationpartitioningssd

I recently installed an SSD into my machine. The machine itself is a Lenovo thinkpad W520, and it previously had an internal HDD. I moved the internal HDD into an expansion bay (replacing the CD-ROM), and put the new SSD into the internal bay.

The problem I'm having is that I have my Ubuntu configuration EXACTLY the way I want it – I originally spent many hours configuring it to get it to the way it is now. I'd rather not do this again. But, I'd also like the boot-up gains I would get from the OS being on the SSD.

So, what I'd like to do is clone my Ubuntu partition onto the SSD. The catch is that the standard HDD is significantly bigger than the SSD. And it has a windows partition that I don't need on the SSD (I never use Windows, so if it boots off of the other hard drive, that's fine). The layout of my hard drives are as follows:

/dev/sda (SSD):
Model: ATA M4-CT256M4SSD2 (scsi)
Disk /dev/sda: 256GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size   Type     File system  Flags
 1      1049kB  147GB  147GB  primary  ext4         boot

/dev/sdb (HDD):
Model: ATA ST9500420AS (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
 1      1049kB  1259MB  1258MB  primary   ntfs            boot
 2      1259MB  269GB   268GB   primary   ntfs
 4      269GB   483GB   214GB   extended
 5      269GB   416GB   147GB   logical   ext4
 7      416GB   475GB   58.9GB  logical   linux-swap(v1)
 6      475GB   483GB   8470MB  logical
 3      483GB   500GB   16.8GB  primary   ntfs

What I've tried so far:

1) Resizing the partitions /dev/sdb5 and /dev/sda1 to be the same size.
2) Booting into Ubuntu 11.04 (from /dev/sdb5) and running dd if=/dev/sdb5 of=/dev/sda1 (of course this causes problems with booting, so I had to reinstall grub.. I can get it to boot, but then I have problems with initrd not finding some files … presumably it can't load some partitions I think).

Now, I think those two steps are the wrong approach, because it will clone /dev/sdb5 EXACTLY – including references in fstab which point to the wrong hard drive. I'm not sure exactly how to rectify this. I could install Ubuntu 11.04 onto the SSD, then try and copy over all of my configurations, but I'm concerned that I'm going to lose something, or that I'm going to overwrite something like fstab that points back to the original hard drive.

Note that currently, I can still boot from the HDD, so it's not imperative that I get this figured out right away, but I do want it to be exactly how it is right now, so that I can maintain my current level of productivity (it's a work laptop).

Suggestions on how I might be able to overcome this difficulty?

Thanks in advance!

Best Answer

  • There is more than one way to accomplish getting your old system onto a new drive, but you didn't really ask it that way, you asked for how to clone the system.

    I would just use gparted, myself, from the live CD so neither partition is mounted. You can shrink the original partition to the size you want it to be on the SSD, then copy and paste the partition to the new drive. If I remember correctly, this will reuse the same UUID, but you can change that on one or the other partition afterwards. The command for this is sudo tune2fs -U random /dev/sdb5 assigns UUID for sdb5.

    If you don't want to change the old system, and if you want to keep it mounted for a while, you could change the UUID for the SSD partition, and edit your fstab. It's actually not hard at all, and is something you should learn about. It's pretty self-explanatory for someone with the knowledge you already seem to have. Once you assign a new UUID, you can see all of them with this command: sudo blkid -c /dev/null - the parameter -c specifies the cache file, and /dev/null means don't use a cache, so you always get any changes right away. I always use that form, and can see no downside unless you have a lot of partitions.

    Once you get the UUID, you can copy and paste it over the old one in /etc/fstab using gedit or whatever text editor you prefer.

    Personally, though, rather than taking time to resize the partition first, I'd simply copy the old install to the new disk. If you don't know how to install GRUB to the mbr, you might want to first install a base Ubuntu, then back up /etc/fstab, copy the old install over it, and then copy the fstab from the new install so it has only the correct entries.

  • Related Question